Top 9 U Joint Tool OTC – Automotive Replacement Universal Joints

As an Amazon Associate I earn from qualifying purchases.

1. OTC

#ad

OTC Tools 5190A Heavy Duty U-Joint Puller for Use on Class 7 and 8 Trucks

#ad
OTC #ad - Major tool components are heat treated for improved strength and durability, ensuring a long, productive service life. Large diameter threaded shaft can handle U-joints that are severly seized due to corrosion and require more force to disassemble.

Ideal tool for removing heavy-duty driveline u-Joints on Class 7 and 8 Trucks in conjunction with up to a 1 inch impact wrench not included - without the need for heat or hammering. Smooth, bearing cups, crisp threads allows for a lower, more consistent effort to rotate shaft; will not damage the driveshaft, yoke, or joints. Fits spicer driveline 1610, and 250 'life series'; meritor rockwell 16n, 170, 1810, 1760, 1880; spicer SPL 140, 1710, 18n, 17n, 1710; Meritor RPL 20 and 25 'Permalube' series.
BrandOTC #ad
ManufacturerOTC Tools #ad
Height5 Inches
Length12 Inches
Weight11.4 Pounds
Width9 Inches
Part Number5190A
Model5190A
Warranty1 year manufacturer

2. OTC

#ad

OTC 7249 Ball Joint, U-Joint, and Brake Anchor Pin Service Kit with Storage Case

#ad
OTC #ad - Contains 3 receiver tubes - 2-3/4 inch id x 3 inch od, 2-1/4 inch ID x 2-1/2 inch OD, and 1-3/4 inch ID x 2 inch OD. Includes 1 each; installing cup, receiving cup, and installing adapter. Otc's ball joint, universal joints, u-joint, and Brake Anchor Pin Service Kit removes and installs press-fit parts such as ball joints, and truck brake anchor pins. Clamp frame features heavy duty materials and construction to prevent distortion in severe use cases. Sturdy blow molded hard case keeps contents protected and secure when not in use.
BrandOTC #ad
ManufacturerOTC #ad
Height5.7 Inches
Length16.2 Inches
Weight0.02 Pounds
Width16 Inches
Part Number7249
Model7249
Warranty1 year manufacturer

3. OTC

#ad

OTC 7248 C-Frame Press for U-Joints, Brake Anchor Pins, Wheel Studs, and Ball Joints

#ad
OTC #ad - 6935 adapter. Handy tool also removes heavy duty truck brake anchor pins, press in wheel studs, and ball joints on most cars and light trucks with press-fit type ball joints.

Removes and installs ball joints without the need to remove the control arm from the vehicle, saving time and money. High-grade materials ensure quality performance over the lifetime of the tool. Otc's c-frame press removes and installs automotive universal joints with needle bearings including GM plastic pin CV U-joints. Can also service u-joints found on dana 60 4WD front drive axles with the addition of an OTC No.
BrandOTC #ad
ManufacturerOTC #ad
Height11.8 Inches
Length7.4 Inches
Weight0.01 Pounds
Width2 Inches
Part Number7248
Model7248

4. OTC

#ad

OTC 5192 Heavy-Duty Bearing Cup Installer for Bolt-Retained U-Joints

#ad
OTC #ad - Crafted from high-grade materials to ensure quality performance over the lifetime of the tool. Eliminates the possibility of damage to the needle bearings. Design automatically aligns bearing cups during installation for a hassle-free job. For use with spicer series 1610 to 1880 and nearly all other heavy-duty truck and machine type u-joints with bolt-retained bearing cups. Otc's heavy-duty bearing cup Installer quickly and easily installs bearing cups on bolt-retained universal joints.
BrandOTC #ad
ManufacturerOTC #ad
Height3.75 Inches
Length4 Inches
Weight1.65 Kilograms
Width2.25 Inches
Part Number5192
Model5192

5. OTC

#ad

OTC 6935 Dana 60 U-Joint Service Adapter No. 7248 C-Frame Press

#ad
OTC #ad - For use on the following vehicles originally equipped with Dana 60 front axles:. Otc's u-joint service adapter is designed for use with OTC's No. 1977-91 chevrolet and gmc 1 ton trucks, 1975-10 Dodge 3/4 and 1 Ton Trucks. Heavy-duty steel construction ensures constistent performance and durability for the life of the tool. 2000-02 ford excursion, 1999-08 ford f450, 1985-10 ford f350, 1999-10 ford f250, 1999-04 Ford F550.7248 c-frame to service u-joints found on Dana 60 4WD front drive axles.
BrandOTC #ad
ManufacturerOTC #ad
Height2 Inches
Length4 Inches
Weight0.1 Pounds
Width2 Inches
Part Number6935
Model6935
WarrantyLimited Lifetime

6. OTC

#ad

OTC Ball Joint Intermediate Service Kit 6530

#ad
OTC #ad - This 20+ adapter kit covers many Truck/Van/SUV applications and some car applications. With the majority of cars and truck/Van/SUV applications having press-in ball joints and universal joints, this kit is designed to service many of those applications. This kit is a combination of 7249, ball joint application Guide, and includes 20+ adapters, C-Frame, 7918, and 7996 kits, and carrying case.
BrandOTC #ad
ManufacturerOTC Tools #ad
Height27.7 Inches
Length14 Inches
Weight0.03 Pounds
Width5.5 Inches
Part Number6530
Model6530
WarrantyPer contract with Amazon

7. OEMTOOLS

#ad

OEMTOOLS 24538 Heavy Duty Automotive U Joint Puller, Mechanic’s Tool for Disassembling Drivelines, Removes Seized U-Joint Cups on Class 7 & 8 Trucks

#ad
OEMTOOLS #ad - Trusted by professionals: oemtools products are trusted by mechanics all over the world to get the job done fast; You can trust our U Joint Puller to reliably tackle the most difficult U-joint removals time after time.

Durable build quality: built to hold up through heavy duty use; Remove a seized back or front driveshaft U-joint, and keep on going; Built to last a lifetime. Gentle on vehicles: this u joint press handles the toughest jobs while preventing damage on the driveshaft, and bearing cups, joints, yokes, reducing the need to purchase replacement parts.

Remove on variety of models: this heavy Duty U Joint Puller features a universal fit that easily removes seized U-joint cups on most class 7 and 8 trucks. Easy and safe to use: use this u joint tool to safely disassemble drivelines without hammering or heating components; It can be used with a 1 inch drive impact wrench or smaller.
BrandOEMTOOLS #ad
ManufacturerOEMTOOLS #ad
Height13.6 Inches
Length8.5 Inches
Width3.7 Inches
Part Number24538
Model24538
WarrantyOEMTOOLS Limited Lifetime

8. Orion Motor Tech

#ad

Orion Motor Tech Master Ball Joint Press Kit & U-Joint Puller Service Tool Set 21PCS, Upper and Lower Ball Joint Removal Tool Kit for Ball Joint Service with C-Press

#ad
Orion Motor Tech #ad - All-in-one tool kit: 9x adapters, 1x center rod, 1x install adapter, 1x install Cup, 1x C-Frame, 1x Receiving Cup, 1x removal adapter, 3x Receiving Tubes, 1x Screw, 1x Install Cup Adapter, 1x Sleeve. Easy operation: use our 22pcs ball joint press set with multi-size adapters to effortlessly remove press-fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive 2WD and 4-wheel drive 4WD vehicles without removing the control arm from the vehicle.

Professional-grade durability: built to last with heavy-duty forged carbon steel with anti-rust black-oxide finished adapters for maximum strength and longevity that resists rust and corrosion. Universal compatibility: this tool set works with most gm, or vehicles with the Dana 28, 30, ford, 44, vans and sport utility vehicles, 35, Chevy, and Dodge 2 and 4 wheel drive pickups, 60 axles.

Protective carrying case: each component is contained in a heavy-duty ABS plastic blow-molded carrying case with handle for safe storage and quick organization. If you are not satisfied with this product or if you have any questions, please feel free to let us know.
BrandOrion Motor Tech #ad
ManufacturerOrion Motor Tech #ad
Part NumberOMT-BJS-0021-RD

9. Orion Motor Tech

#ad

For Most 2WD and 4WD Cars and Light Trucks, Heavy Duty Ball Joint Press & U Joint Removal Tool Kit with 4x4 Adapters

#ad
Orion Motor Tech #ad - Constructed from heavy-duty forged steel with black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion. If you are not satisfied with this product or if you have any question, please feel free to let us know. Essential tool for ball joint service - use the orion motor tech ball joint press set ball joint tool / bushing Removal Tool with 4WD Adapter to effortlessly remove press fit parts including ball joints, brake anchor pins, U-joints, and more on most 2-wheel drive 2WD and 4-wheel drive 4WD vehicles without removing the control arm from the vehicle.

Conveniently organized in custom molded case - ball joint press / bushing/ removal tool kit is enclosed inside a heavy-duty 11” x 3” x 15” inch 27. 9cm x 7. 6cm x 38. 1cm plastic blow-molded carrying case with handle for easy storage, and quick organization. Universally compatible with a wide range of vehicles - fit most american domestic and imported 2-wheel drive 2wd and 4-wheel drive 4WD cars and light pickup trucks that have press-fit type ball joints, include 4-wheel drive 4WD adapter that allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 30 or 44 front axle found on Ford, Dodge, GM, IHC and Jeep vehicles.

Orion motor tech - we pursue outstanding quality and professional technical support. Package include: 3x receiving tube, 1x install cup adapter, 1x Receiving Cup, 1x Forcing-screw Press, 1x Removal Adapter, safe storage, 1x Installation Adapter, 1x Screw, 1x Installing Cup. Professional grade quality and durability - off road weekend warriors, novices, and professional mechanics trust the ORION kit because ORION MOTOR TECH sources the highest quality components from around the world.
BrandOrion Motor Tech #ad
ManufacturerOrion Motor Tech #ad
Height3.54 Inches
Length13.98 Inches
Width11.91 Inches
Part NumberOMTCA BJS-0401-00
Model8542035336
Warranty2 Years Warranty, Free Replace or Full Refund