1. Longacre
#ad
Longacre 52-79620 Toe Gauge
#adLongacre #ad - Easily done by one person - place the gauge in front of the tires and align the pointers within the scribe lines. Loosen the thumb screws to adjust the width of the pointers for maximum accuracy.More information #ad
Features easy-to-read measurements and is adjustable up to 70" in width. Fast and easy way to measure toe-in - slide the pointers against the tires, then measure toe to within 1/16". Built to last, this toe-in gauge is constructed of strong billet aluminum.Brand | Longacre #ad |
Manufacturer | Longacre #ad |
Height | 4.1 Inches |
Length | 40 Inches |
Width | 4.1 Inches |
Part Number | 52-79620 |
Model | 52-79620 |
Warranty | Parts |
More information #ad
2. VKRP Distributors
#ad
VKRP Distributors Wheel-Alignment-Toe-in-Toe-Out-Gauge
#adVKRP Distributors #ad - Check wheel alignment in minutes. This tool measures toe-out and toe-in on a simple to read gauge. Maximum distance from outside of tire to outside of other tire must be less than 81". Reads wheel wobble.More information #ad
Brand | VKRP Distributors #ad |
Manufacturer | VKRP Enterprises #ad |
Height | 6 Inches |
Length | 36 Inches |
Weight | 4 Pounds |
Width | 2 Inches |
Part Number | 0670541879436 |
More information #ad
3. Longacre
#ad
Longacre 52-79622 Toe Bar
#adLongacre #ad - Adjustable up to 88" in width - this toe-in bar from Longacre is great for wide track cars. Can easily be done by one person - this new design measures to the outside of the tires - no scribe line needed.More information #ad
Built to last, this toe-in gauge is constructed of strong billet aluminum. Features small wheels on the bar that allow it to slide under the car easily. This toe-in bar is simple and easy to use - slide the rod against the tire, then measure toe to within 1/16".Brand | Longacre #ad |
Manufacturer | Longacre #ad |
Height | 4.1 Inches |
Length | 53.6 Inches |
Weight | 10 Pounds |
Width | 4.1 Inches |
Part Number | 52-79622 |
Model | 52-79622 |
Warranty | Parts |
More information #ad
4. Longacre
#ad
Longacre Racing 79501 Aluminum Toe-In Plates w/Magnets
#adLongacre #ad - These plates are the quickest and simplest way to check toe-in - any contact with other cars or retaining walls is likely to change the toe setting.Easy to use - rest one of these plates against the tire on each side and measure toe directly using the 2 tape measures included. The longacre toe-in plates formed design is rigid for accuracy and stays put against the tire while the magnets hold the tape in place.
More information #ad
The dimensions of the longacre toe-in plates are 23-1/2" x 9" and are sold as a pair with two 3/4" tapes that feature 1/32" increments. Get the most accurate reading - always remember to turn wheels so they are facing straight ahead on level ground and set caster and camber first.Brand | Longacre #ad |
Manufacturer | Longacre #ad |
Height | 2 Inches |
Length | 25 Inches |
Weight | 6 Pounds |
Width | 10 Inches |
Part Number | 52-79501 |
Model | LON52-79501 |
Warranty | Parts |
More information #ad
5. Tool Aid
#ad
Tool Aid SG SGT61500 Duby Wheel Aligning Gauge
#adTool Aid #ad - Package dimension : 3. 81 cms l x 7. 62 cms w x 72. 39 cms H. Package weight: 1. 678 kilograms. Operational width range is 46" - 74". For standard cars, trucks & buses. Inexpensive and easy to read. Country of origin: CHINA. Instant and direct "toe-in, toe-out" reading.More information #ad
Brand | Tool Aid #ad |
Manufacturer | SG Tool Aid #ad |
Height | 1.5 Inches |
Length | 28 Inches |
Weight | 3.62 Pounds |
Width | 3 Inches |
Part Number | SGT61500 |
Model | SGT61500 |
Warranty | 30 day warranty on material and workmanship |
More information #ad
6. Tenhulzen Automotive
#ad
All-in-one Camber/Caster/Toe Plates, Made in USA, Tenhulzen Automotive 2-Wheel Alignment Tool
#adTenhulzen Automotive #ad - All-in-one tool measures camber, Caster, AND Toe! Patent pending wheel stand-offs provide unparalleled accuracy. Camber accurate to Within 01 degrees much better than a bubble gauge. Detailed, step by Step Video Instructions. Expensive turn plates Are NOT Needed for Caster Measurment.More information #ad
Brand | Tenhulzen Automotive #ad |
Manufacturer | Tenhulzen Automotive #ad |
Height | 2.25 Inches |
Length | 23.5 Inches |
Weight | 5.88 Pounds |
Width | 9.8 Inches |
Part Number | 3300 |
Model | 3300 |
More information #ad
7. Speedway Motors
#ad
Front End Toe Alignment Gauge Tool
#adSpeedway Motors #ad - 67 1/2" max width. High tech aluminum gauge for measuring toe. Maximum 67-1/2 inch track width. Measures in 1/16" increments. Eliminates need for tape measures.More information #ad
Brand | Speedway Motors #ad |
Manufacturer | Speedway Motors #ad |
Height | 2.4 Inches |
Length | 41.2 Inches |
Weight | 7 Pounds |
Width | 4.4 Inches |
Part Number | 3008000 |
More information #ad
8. RPM
#ad
RPM Monster Camber Gauge
#adRPM #ad - Capable of measuring the camber angle on tires up to 6. 5 inches and taller. Proudly made in the USA. Package dimensions: 9. 38" l x 6. 88" w x 088" h. Camber accuracy to within ½ of a degree.More information #ad
Brand | RPM #ad |
Manufacturer | HRP Distribution #ad |
Height | 0.88 Inches |
Length | 9.38 Inches |
Weight | 0.45 Pounds |
Width | 6.88 Inches |
Part Number | 70950 |
Model | RPM70950 |
Warranty | Warranty Terms and Restrictions: http://www.rpmrcproducts.com/faq/warranty.htm |
More information #ad
9. Zackman Scientific
#ad
Zackman Scientific Wheel Alignment Clamp Tool for Use with Magnetic Alignment Camber Gauge, Wheel Alignment Kit Camber Alignment Tool
#adZackman Scientific #ad - Stainless steel: stainless Steel Adapter Plate for Camber Caster Gauge. Universal adapter plate: Wheel Alignment Tool with Universal Adapter Plate for Magnetic Camber Gauges.More information #ad
Durable slider rods: Heavy Duty Slider Rods. Hunter style locating pins: Adjustable and Reversible Hunter Style Rim Locating Pins. Fits most rim sizes: mounts onto 11" to 25" Rims on the Rim's Edge.Brand | Zackman Scientific #ad |
Manufacturer | Zackman Scientific #ad |
Part Number | ZAWG001 |
Model | ZAWG001 |
More information #ad