As an Amazon Associate I earn from qualifying purchases.
PTE #ad - Takes 1 x aaa/1. 5v battery included. Quick and easy way to test for moisture content in the brake fluid; results appear in seconds! Led light indicators show percentage of water in the brake fluid.
ITEQ #ad - Test the car brake fluid quality quickly to check whether it’s qualified, which can remind you to change the brake fluid when necessary to avoid traffic accident. Protective cap included. Takes 1 x AAA/1. 5v battery not included.
CRC #ad - This item is not for sale in catalina island. Cannot be sold for use in ca or nj. Formulated to quickly & effectively remove grease, & other contaminants from brake parts, oils, brake fluids, lining, brake dust, pads. Non-flammable. The original brake parts cleaner.
BSBMIEQM #ad - Protects you & your car : check the health status of dot3, dot4 car brake fluid, Brake Fluid Tester Pen can be used as a digital brake fluid tester suitable for determining brake fluid quality.
It will be safe for your driving. 5 leds : 5 led display lights the percentage of moisture content in the brake fluid, as the test results are more accurate. Automatic shutdown after about 15 seconds of inactivity.
Fuzbaxy #ad - Only takes seconds to know the results, very easy to use. Test the car brake fluid quality quickly to check whether it’s qualified, which can remind you to change the brake fluid when necessary to avoid traffic accident.
ARES #ad - Item specifications: our fluid change syringe features a manual pump chamber assembly, a 7. 5-inch flexible tube with a non-drip cap and a fluid capacity up to 7 oz 200cc. If you have a pet, you realize they are more than a pet, they are part of the family. The transparent chamber and flexible tube allow you to keep a close eye on fluids during extraction and prevent spills.
Design: this lightweight car fluid evacuator features a low profile design which enables you to access tight and confined spaces with ease.
This syringe can also be used to add fluids. Applications: this automotive fluid syringe is ideal for removing used fluids from brake master cylinders, power equipment oil, power steering reservoirs, hydraulic final drives, gas tanks, manual transmissions, and more prior to bleeding, transaxles, coolant reservoirs, fluid changes or repairs. Reliable | effective | efficient: users trust ares to be quality tools. With your support, we’re proud to help this great organization.
Prestone #ad - Both wet and dry boiling points exceed the minimum government standards. Mix of polyglycol ethers ensures hot brake-system operation will not create dangerous vapor.
Taxutor #ad - 5 led display lights the percentage of moisture content in the brake fluid, as the test results are more accurate. Easy to use simply power up, small compact size, super strong abs shell, Only takes seconds to know the results.
High quality electrical conductivity mental design, dip probes into brake fluid and read results, easy to carry in pocket.
color tree #ad - Select the appropriate socket according to the pins, press the "Test" button, and the red clip on the positive pole. It is easy to use, suitable for general-purpose automotive relays on the market. The applicable coil resistance is preferably above 20 ohms.
Our tester can quickly detect whether your relay is normal. When testing, it needs to be connected to the car's 11V-15V battery. Operating instructions：first, clip the tester’s alligator clip to the car battery: the black clip on the negative pole, it means the tester can start the test.
If you have any questions about our product, compact structure, and being easy to carry, please contact to us by email and we will help you. Test to properly control the opening and closing of the relay. The car battery must be a 12v battery and the battery voltage must be between 11V-15V; 2. Check the relay before testing. When the red led light is on, insert the relay into sockets, and the tester will automatically detect the pin position of the unknown relay. Note: 1.
1. PTE
#adPTE Brake Fluid Tester, calibrated for DOT 4 Brake fluids
#adMore information #ad
Calibrated for cars using DOT 4 brake fluid only found in most cars produced since 2006. Only takes seconds to know the results.| Brand | PTE #ad |
| Manufacturer | KMI #ad |
| Height | 0.79 Inches |
| Length | 5.91 Inches |
| Weight | 0.11 Pounds |
| Width | 0.94 Inches |
| Part Number | K228-28 |
| Model | Brake Fluid Tester |
| Warranty | 1 Year |
More information #ad
2. ITEQ
#adCalibrated For DOT3 DOT4 Brake Fluid, ITEQ Brake Fluid Liquid Tester Pen with 5 LED Indicators
#adMore information #ad
The led indicators will show percentage of water in the brake fluid with 3 colors green yellow and red. Only takes seconds to know the results, very easy to use. Calibrated for cars using dot4 and dot3 brake fluids But DOT3 is almost replaced by DOT4 because DOT4 has better performance. Ce and rohs approved.| Brand | ITEQ #ad |
| Manufacturer | ITEQ #ad |
| Height | 0.59 Inches |
| Length | 5.91 Inches |
| Weight | 0.09 Pounds |
| Width | 0.59 Inches |
| Part Number | BFT1001DOT4 |
| Model | BFT1001 |
More information #ad
3. CRC
#adNon-Flammable -1lb 3 Oz 05089, CRC BRAKLEEN Brake Parts Cleaner
#adMore information #ad
| Brand | CRC #ad |
| Manufacturer | CRC #ad |
| Height | 11.25 Inches |
| Length | 10 Inches |
| Weight | 1.4 Pounds |
| Width | 8.5 Inches |
| Part Number | 05089 |
| Model | 5089 |
| Warranty | Manufacturer Warranty |
More information #ad
4. BSBMIEQM
#adAuto Brake Diagnostic Testing Tool, Brake Fluid Liquid Tester, Hydraulic Fluid Liquid Oil Moisture Analyzer with 5 LED Indicators, Auto Brake Diagnostic Testing Tool for DOT3 DOT4 Brake Fluid
#adIt will be safe for your driving. 5 leds : 5 led display lights the percentage of moisture content in the brake fluid, as the test results are more accurate. Automatic shutdown after about 15 seconds of inactivity.
More information #ad
Easy to carry : small size, you can take it in pocket, take 1 AAA 1. 5v battery. Eaty to use : press the button, insert the tester into reservoir for one second then the tester result will be correctly indicated by LEDs. Repress the button for power off. Usefull : supports dot3 DOT4 DOT5 brake fluid.| Brand | BSBMIEQM #ad |
| Height | 0.59 Inches |
| Length | 5.91 Inches |
| Width | 0.59 Inches |
| Part Number | 738192087454 |
More information #ad
5. Fuzbaxy
#adFuzbaxy Brake Fluid Tester Automotive Tools Diagnostic Testing Tool Auto Brakes Calibrated for DOT3 DOT4 DOT5 with 5 LED Indicator
#adMore information #ad
Calibrated for cars using dot4 and dot3 brake fluids But DOT3 is almost replaced by DOT4 because DOT4 has better performance. Protective cap included. Takes 1 x AAA/1. 5v battery not included. The led indicators will show percentage of water in the brake fluid with 3 colors green yellow and red. Ce and rohs approved.| Brand | Fuzbaxy #ad |
| Manufacturer | Fuzbaxy #ad |
| Part Number | AP185 |
| Model | NCOREDSHKF7857 |
More information #ad
6. ARES
#adIdeal for Power Steering Fluid, Brake Fluid Removal and More, 200cc Max Capacity, ARES 70920, Smooth Suction Action for Easy Fluid Change, Fluid Change Syringe
#adDesign: this lightweight car fluid evacuator features a low profile design which enables you to access tight and confined spaces with ease.
More information #ad
If you have any issues with your aRES Fluid Change Syringe, replacement, simply contact customer service for troubleshooting help, parts, or refund. You are backed by our Performance Assurance. Aspca business ambassador: we are proud to be part of the aspca business Ambassador Program. This syringe can also be used to add fluids. Applications: this automotive fluid syringe is ideal for removing used fluids from brake master cylinders, power equipment oil, power steering reservoirs, hydraulic final drives, gas tanks, manual transmissions, and more prior to bleeding, transaxles, coolant reservoirs, fluid changes or repairs. Reliable | effective | efficient: users trust ares to be quality tools. With your support, we’re proud to help this great organization.
| Brand | ARES #ad |
| Manufacturer | ARES #ad |
| Part Number | 69969 |
| Model | 5824089450 |
| Warranty | Performance Assurance |
More information #ad
7. Prestone
#adPrestone AS400 DOT 3 Synthetic Brake Fluid, 12 oz.
#adMore information #ad
Excellent for ABS, disc and drum brake systems. Delivers braking power when needed by avoiding a spongy pedal. Provides an extra margin of safety in extreme braking conditions.| Brand | Prestone #ad |
| Manufacturer | Prestone #ad |
| Height | 6 Inches |
| Length | 3 Inches |
| Weight | 11.7 Pounds |
| Width | 3 Inches |
| Part Number | AS400 |
| Model | AS400 |
More information #ad
8. Taxutor
#adTaxutor 2pcs Brake Fluid Tester Pen Hydraulic Fluid/Liquid/Oil Moisture Analyzer with 5 LED Indicators, Auto Brake Diagnostic Testing Tool for DOT3 DOT4 Brake Fluid
#adHigh quality electrical conductivity mental design, dip probes into brake fluid and read results, easy to carry in pocket.
More information #ad
Check the health status of dot3, DOT4 car brake fluid, dangerous if you do not change brake fluid timely. Operated by a lr03 aaa 1. 5v battery not included, automatic shutdown after about 15 seconds of inactivity. Please note: please use clean water to clean after the test, otherwise the brake fluid may corrode the test pen.| Brand | Taxutor #ad |
| Manufacturer | Taxutor #ad |
| Part Number | AP0046-B |
More information #ad
9. color tree
#ad12V Electronic Automotive Relay Tester Auto Car Diagnostic Battery Checker Tool Relay Tester Automotive Kit
#adOur tester can quickly detect whether your relay is normal. When testing, it needs to be connected to the car's 11V-15V battery. Operating instructions：first, clip the tester’s alligator clip to the car battery: the black clip on the negative pole, it means the tester can start the test.
More information #ad
With its small size, you can test anywhere you want. When the relay is not a general-purpose relay on the market or the relay is damaged, it will turn on the red LED. Package includes: 1* Relay Tester. If you have any questions about our product, compact structure, and being easy to carry, please contact to us by email and we will help you. Test to properly control the opening and closing of the relay. The car battery must be a 12v battery and the battery voltage must be between 11V-15V; 2. Check the relay before testing. When the red led light is on, insert the relay into sockets, and the tester will automatically detect the pin position of the unknown relay. Note: 1.
| Brand | color tree #ad |
| Manufacturer | COLOR TREE #ad |
| Part Number | SKUA09278 |
More information #ad
