As an Amazon Associate I earn from qualifying purchases.
1. STEINBRÜCKE #ad
E8012S Universal Electric Fuel Pump Low Pressure 5-9 PSI 12V w/Installation Kit #adSTEINBRÜCKE #ad
- Crossreference : e8012s, 6414671, it features a two wire design, ep12s, fd0002, p60430, which can be mounted anywhere. If not satisfied, please contact us first for replacement. Highest 12 inches fuel suction.
3 years Warranty. Working amperage draw is around 2A. Fuse spec. 12 amps. Compatible electronic devices All 12 Volt Cars, Trucks, Boats & Generators. Model: e8012s, output pressure: 5-9 psi，input voltage: 12 volt ; the product is manufactured in ISO 9000 / ISO 9001 / ISO 9002 certified facilitie.
2. JEGS #ad
JEGS Street Electric Fuel Pump | 110 GPH / 416 LPH | 3/8 “ NPT Ports | Draws 2 Amps at Full Load | Preset at Approximately 7 PSI | Chrome Finish #adJEGS #ad
- Preset at 7 psi which doesn’t require a fuel pressure regulator. 110 gph / 416 lph fuel flow for most street and occasional strip use applications.
For carbureted applications and gasoline use only. Chrome finish for great looks and long life. 3/8 inch npt fitting size and includes two adapters to 3/8 “ hose barbs.
3. JEGS #ad
JEGS Street/Strip Electric Fuel Pump | 120 GPH / 454 LPH | 3/8 “ NPT Ports | Draws 3 Amps at Full Load | Preset at Approximately 14 PSI | Chrome Finish #adJEGS #ad
- 120 gph / 454 lph fuel flow for most street and occasional strip use applications. 3/8 inch npt fitting size and includes two adapters to 3/8 “ hose barbs.
Chrome finish for great looks and long life. For carbureted applications and gasoline use only. Preset at 14 psi which will require a fuel pressure regulator available separately.
4. Carter #ad
Carter P4070 In-Line Electric Fuel Pump #adCarter #ad
- Carter fuel systems universal fit Rotary vane pumps are internally regulated, offer a free flow design with no points to burn out or shaft seals to leak.
12 volt. Includes comprehensive installation kit and full instructions for a hassle free installation. 1/4 inch npt inlet and outlet. 4 - 6 psi output, 72 gph free flow.
|Warranty||Carter Electric Fuel Pumps and Electric Fuel Pump Modules are covered by a Lifetime Limited Warranty. Refer to Carter website www.carterfuelsystems.com for the terms of Carter’s Lifetime Limited Warranty.|
5. JEGS #ad
JEGS High Performance Electric Fuel Pump | -08AN Inlet / -06AN Outlet | For Carbureted And Fuel Injected Applications #adJEGS #ad
- Compatible with efi gasoline engines up to approximately 700 HP normally aspirated and 500 HP turbo/supercharged. Includes brass stud terminals for quick and reliable electrical connection with boots and two T-bar style mounting clamps.
For use with either carbureted or fuel injected gasoline engines. Supports carbureted gasoline engines up to approximately 900 HP normally aspirated and 700 HP turbo/supercharged. Pump dimensions: length 7-3/4", diameter: 2-1/2", base to top of mounting bracket: 3-3/4".
6. JEGS #ad
JEGS Ultra-Quiet Electric Fuel Pump | 120 GPH | 3/8 “ NPT Ports | Up To 600 Horsepower Carbureted Applications | Gasoline Only | Made In USA | Dimensions: 7" H x 6" W x 5" D #adJEGS #ad
- Constructed with heavy-duty internals and an inline fuel flow design that keeps it cool even in crude environments. Reusable screen inlet filters are simple to remove and wash.
Includes stainless steel mounting bracket with cushion & hardware. Adjustable with the built-in adjustment screw to increase or decrease fuel pressure. Made in usa with high quality components and assembly.
7. Holley #ad
Holley Electric Fuel Pump 6145-2 Red Auto #adHolley #ad
- Motor draws 2 amps current. Maximum pressure is 7 psi. Fit type: Vehicle Specific. Tumble polished billet look. Lower housing casting designed for enhanced fuel flow.
8. JEGS #ad
JEGS EFI Electric Fuel Pump | Supports Up To 500 Horsepower Normally Aspirated | 5/16 Hose Nipple Inlet/Outlet | 43 GPH At 40 PSI @ 13.5 V #adJEGS #ad
- Supports fuel-injected gasoline engines up to approximately 500 HP normally aspirated. Pump dimensions: length 4", diameter: 2". Specifications: 43 gph at 40 PSI @ 13.
5 v. Includes 2 cushioned mounting clamps and 4 mounting bolts. Ideal for installation with a fuel cell, drop sump style tank or when an in-tank unit is not practical.
9. JEGS #ad
30-Amp Relay, And Crimp Terminals & Hardware | Made In USA, JEGS Single Fuel Pump Harness And Relay Kit | 30 Amp | Includes 80” Wire Harness, 30-Amp Circuit Breaker #adJEGS #ad
- Provides continuous supply of voltage preventing drop off common with OE wire. Heavy-duty 10-18 gauge wiring harness. Includes: 30-amp relay, 30-amp circuit breaker, 80” of wire, and terminals & connectors.
Made in usa with high quality materials and assembly. Highly recommended to be used with an on/off switch or key-on operated switch.