Top 9 Jeep Wrangler JK Rear Bumper – Automotive Bumpers

As an Amazon Associate I earn from qualifying purchases.

1. Smittybilt

#ad

Smittybilt 76855 XRC Textured Black Rear Bumper with 2" Receiver Hitch and D-Ring Mounts

#ad
Smittybilt #ad - Do not use any type of cleaners that contain abrasives that may damage the finish of your part. Two stage matte Black powder coat finish. 2 and 4-door models. Made from 3/16 cold rolled steel and then robotically welded to the exact specifications. Features a 2-inch class iii tow rated receiver hitch and two D-ring mounts D-rings not included.
BrandSmittybilt #ad
ManufacturerSmittybilt #ad
Height20 Inches
Length69 Inches
Weight107 Pounds
Width14 inches
Part Number76855
Model76855
WarrantyLimited WarrantiesSmittybilt products are covered under the following limited warranties only. Note that the duration of the limited warranty differs according to the material and finish of the product purchased. Subject to the duration and conditions of the limited warranty stated below, Smittybilt warrants to the original retail purchaser that its products are free from defects in material and workmanship. All other warranties and representations express or implied are hereby disclaimed, including fitness for merchantability and buyer's intended use or purpose. All parts are sold “AS IS” except for the limited warranties granted herein. Buyer assumes all risks as to the selection, suitability and performance of all goods and products selected. This limited warranty does not cover damage or impairment in any part due to misuse, improper installation, accident or contact with on-road or off-road hazards, product modification, improper or inadequate cleaning and/or maintenance. 1. Limited Lifetime Warranty on Stainless Steel Products - Smittybilt stainless steel products carry the foregoing limited repair or replacement warranty against workmanship and defects in the material so long as the original purchaser retains the original stainless steel parts. 2. Limited Five (5) Year / 50,000 Mile Pro-Rata Warranty (whichever occurs first) on Dual-Stage Powder Coating Products - Smittybilt dual-stage powder coated products carry the foregoing limited repair or replacement warranty for a period of (5) years or 50,000 miles (whichever occurs first) from date of purchase against workmanship and defects in the material, provided that any claim submitted after (2.5) years from date of purchase shall, if accepted, be satisfied by Smittybilt offering customer a credit on the purchase of a replacement product equal to fifty percent (50%) of customer's initial purchase price. 3. Limited Three (3) Year / 36,000 Mile Pro-Rata Warranty (whichever occurs first) on Chrome Products

2. Nilight

#ad

Nilight, JK-52A Rear Bumper Compatible for 2007-2018 Jeep Wrangler JK,Rock Crawler Bumper with Hitch Receiver & 2X Upgraded 40W LED Lights Off Road Textured Black,2 years Warranty

#ad
Nilight #ad - It also gives your vehicle an attractive upgrade in its appearance for added style. Extremely bright: built-in 2pcs 18w nilight upgraded New Design Flush Mount LED Pods. Perfect for off-road use:  featuring 2x nilight upgraded LED Lights two high strength D-Ring mounts and a 2" standard receiver hitch this Nilight Rear Bumper is perfect for off-road use.

If you have any questions or problems, please contact us. Fit type: Vehicle Specific. They brighten up the road, perfect for any night time adventure. Best service: - buy at nilight, you earn what you buy! we offer 2 Years Nilight and Lifetime Best Customer Service. Heavy-duty rear protection: this bumper was designed to add protection to your precious Jeep’s lower rear end while providing it with superior towing capabilities with its heavy-duty D-rings.

Thanks to its convenient bolt-on solution, this bumper installs quickly and easily without requiring any modification to your vehicle. Easy, bolt-on installtion :this nilight mid width rear Bumper is also designed with ease of use and installation in mind.
BrandNilight #ad
ManufacturerNilight #ad
Part NumberJK-52A
ModelJK-52A
Warranty2 Years Warranty

3. Tyger Auto

#ad

Tyger Auto TG-BP9J80098 Tyger Fury Rear Bumper with D-Ring Mounts Textured Black Compatible with 2007-2018 Jeep Wrangler JK Exclude JL

#ad
Tyger Auto #ad - Diy instruction included in the package. Tyger no-hassle 5 year against manufacturing defects! Fits up to 3" side light pods. Comes with welded d-ring mounts and light housings. Easy bolt-on installation. No drilling required. Made of heavy duty 5mm carbon steel with powder coated black textured finish for extreme protection and rust resistant. Vehicle-specific design for a custom fit on : 2007-2018 jeep wrangler jk not for JL | FITMENT – Compatible with 2007-2018 Jeep Wrangler JK NOT for JL.
BrandTyger Auto #ad
ManufacturerTyger Auto #ad
Weight79.57 Pounds
Part NumberTG-BP9J80098
ModelTG-BP9J80098
WarrantyTYGER No-Hassle 5 year warranty against manufacturing defects!

4. Smittybilt

#ad

Smittybilt 76745 SRC Carbine Rear Bumper for 2007-2018 Jeep Wrangler JK, Black

#ad
Smittybilt #ad - Class iii receiver hitch; and solid 3/4" D-ring mounts that are welded on the inside and out. Smittybilt's renown rugged construction lets the cost-conscious or entry level Jeeper play with the big boys. Accommodates aftermarket-style 3x3 cube LED lights. Fits jeep wrangler jk 2- and 4-door models; matches Smittybilt Carbine front bumper 76744. Perfect mid width 57" design with raised corners for better entry and exit under the most extreme conditions.
BrandSmittybilt #ad
ManufacturerSmittybilt #ad
Height15 Inches
Length58 Inches
Weight92 Pounds
Width21 Inches
Part Number76745
Model76745
WarrantyManufacturer Warranty

5. Rugged Ridge

#ad

Body Width; for 2007-2018 Jeep Wrangler JK/JKU, Rugged Ridge 11548.21 Spartan Bumper Rear, 1 Pack

#ad
Rugged Ridge #ad - Sturdy steel plate features fold and weld construction. Narrow body-width bumper adds an aggressive trail-ready look. Works with factory JK tow hitch. Integrated shackle mounts are anchored to the frame for reliable recovery points shackles not included. Center bumper recess allows fitment for oversize wheel and tire combos.
BrandRugged Ridge #ad
ManufacturerRUGGED RIDGE #ad
Height8.75 Inches
Length77.75 Inches
Weight15 Pounds
Width15 Inches
Part Number11548.21
Model11548.21
WarrantyManufacturer Warranty

6. YITAMOTOR

#ad

Textured Black, 2" Hitch Receiver, YITAMOTOR Rock Crawler Rear Bumper Compatible with 07-18 Jeep Wrangler JK Unlimited with D-Ring

#ad
YITAMOTOR #ad - Fit type: Vehicle Specific. Professional installation recommended. Application-compatible with 2007-2018 jeep Wrangler JK and JK Unlimited models, include 2-door and 4-door models. Shackle mount and d-rings-two solid d-ring shackle mounts are welded into the rear bumper from the inside and outside for increasing strength.

75 ton d-rings, the total capacity is 9000 lbs. Heavy steel for maximum protection-this rear Bumper is constructed from heavy duty 5/32 inches steel to keep the body of your car protected from impacts in the harsh off-road environment. Corrosion resistance finish-this bumper for wrangler JK is finished with a e-coat and a powder coat, it will never get rusted even the coat off.

Simple bolt-on installation-the rock crawler rear bumper was smartly engineered to be a direct bolt-on solution for trail headed Cars. Include two 4. In additional, the rear bumper also include a 2" receiver hitch for towing. As a direct fit replacement, welding, this Rear Bumper uses all factory mounting points and requires no additional cutting, or fabrication for installation.
BrandYITAMOTOR #ad
ManufacturerYITAMOTOR #ad
Height17 Inches
Length65.36 Inches
Width12 Inches
Part NumberATYJ0101
ModelRock Crawler Rear Bumper
Warranty90 days manufacturer

7. Smittybilt

#ad

Smittybilt JB48-RT Textured Black Tubular Rear Bumper

#ad
Smittybilt #ad - Tested under extreme conditions. Assured high quality and dependability. One-piece design is robotically welded for extreme durability. Sport the signature look with pre-cut vertical uprights. Stainless steel design is polished to a mirror finish.
BrandSmittybilt #ad
ManufacturerSmittybilt #ad
Height10 Inches
Length69 Inches
Weight41.9 Pounds
Width13 Inches
Part NumberJB48-RT
ModelJB48-RT

8. RAMPAGE PRODUCTS

#ad

Rampage Products 88648 Textured Black Double Tube Rear Bumper for Products JK for 2007-2018 Jeep Wrangler JK

#ad
RAMPAGE PRODUCTS #ad - Made from high endurance materials for long life. Welded to exacting specifications to ensure strength. Easy to install- No drilling required. 3-year limited warranty. Offers best protection and recovery from the impact in a collision.
BrandRAMPAGE PRODUCTS #ad
ManufacturerRampage #ad
Height9 Inches
Length69 Inches
Weight38 Pounds
Width14 Inches
Part Number88648
Model88648
Warranty3 Year Limited Warranty

9. Smittybilt

#ad

Smittybilt 76856 XRC Black Textured Rear Bumper with Hitch and Tire Carrier for Jeep Wrangler/Wrangler Unlimited

#ad
Smittybilt #ad - 5-year limited warranty. 2 and 4-door models. 1-1/4” grade 5 mounting hardware. Manufactured from 3/16” cold rolled steel and then robotically welded to the exact specifications. Fits 2007 to 2016 jk wrangler, Rubicon and Unlimited. Black powder coat. Features pressed tapered 2” diameter bearings, reinforced double sided gussets.
BrandSmittybilt #ad
ManufacturerSmittybilt #ad
Height28 Inches
Length66 Inches
Weight173 Pounds
Width17 Inches
Part Number76856
Model76856
Warranty5-Year limited