Top 8 Shank Lug Nuts 1/2 20 – Wheel & Tire Lug Nuts

As an Amazon Associate I earn from qualifying purchases.

1. Weld Racing

#ad

Weld Racing 601-1416 1/2-20RH Closed End Lug Nut Kit, Pack of 4

#ad
Weld Racing #ad - Lug nut shank measures 1. 380 inch long and applicable for the ProStar, Draglite and Rodlite wheels. Lug nut kit. Fit type: Vehicle Specific. Part number: 601-1416.
BrandWeld Racing #ad
ManufacturerWeld Racing #ad
Height0 Inches
Length0 Inches
Weight0.5 Pounds
Width0 Inches
Part Number601-1416
Model601-1416

2. StanceMagic

#ad

1.75 inch Length, 20pcs Chrome Silver Bulge Lug Nuts, Cone Conical Taper Seat Shank, ET Style Extended Threads, 1/2x20 Threads, Closed End, Compatible with 5Lug Vehicles Wheels

#ad
StanceMagic #ad - Included: one package contains a 20 pack of long, bulge closed lug nuts. Heat treated to ensure dependable strength, rust and scratch resistance. Our lug nuts are made with with strong cold forged steel. Triple coating provides the ultimate in corrosion, at a significant cost savings.

Compatible with ford 80-96 f150, 87-90 dakota, 64-14 mustang, 83-12 ranger. Failure to install correct hardware is unsafe and may cause wheel/tire assembly to loosen or fall off while vehicle is in motion. These chrome lug nuts arrive in a small compact box that is portable for easy storage. Compatible with dodge 65-77 monaco, 07-12 nitro, 84-90 bronco ii. See diagram for Measurements. Compatible with ford 92-06 E-150 Econoline, 86-97 Aerostar.

These 1/2-20 lug nuts are not an oem or genuine oe part, but are compatible with various ford, mercury, dodge vehicles. Safety advisory: wheel hardware is an important safety component. Compatible with ford 92-11 crown victoria, 01-10 explorer sport trac. Ensure these lug nuts are the proper thread size and length/width before installing. Additionally, ensure your wheels' lug seat matches these lug nuts.
BrandStanceMagic #ad
ManufacturerPrecision European Motorwerks #ad
Height1.75 Inches
Length6 Inches
Width6 Inches
Part Number1/2in-CS-ET-Bulge-SR-20pc

3. glorider

#ad

Glorider 1/2-20 Lug Nuts 20Pcs Chrome 1/2 20 Open End ET Lugnuts 28mm Height 3/4 Hex 1/2x20 Conical Cone Seat Bulge Acorn Lugnut for Spacers Aftermarket Wheels Lug Nut

#ad
glorider #ad - Please check and make sure this size fits your vehicle before purchasing. If you have any questions, please feel free to ask us at any time. Warrantywe offer "30-day free returns" service. Fitsfactory oem wheels or wheels made by the vehicle manufacturer.

Cold forged and heat treated carbon steel for improved rigidity and durability. One-piece design, not easy to break, Ensures safer driving, Zinc-Plated, Ensure Anti-Rot. Size1/2 x 20 thread, 20pcs, height 28mm 1. 1in and width 23mm 09inch, 19mm 3/4" hex, cone/taper/conical 60 degree seat, Open-End acorn bulge design lug nuts, chrome.

Quality1/2 open ended lug nuts are cnc machined to ensure precise and smooth thread pitch, Exceeds O. E. M standards. Noteonly fits aftermarket wheels lug nuts 1/2 20 thread and taper/cone 60 degree seat 3/4 hex nut. We will reply within 24 hours. Recommend for aftermarket wheels or wheel spacer installation. Manual installation is recommended.
Brandglorider #ad
Manufacturerglorider #ad
Part NumberGR-8N1220

4. McGard

#ad

McGard 61000 Chrome Regular .746" Shank Style Lug Nuts 1/2", 20 Thread Size, Set of 4

#ad
McGard #ad - Note: Regular. 746″ shank lug nuts match Regular. 580″ shank Locks and visa versa. Mcgard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.

Sets contain polished stainless steel washers. Every lock is through-hardened and tempered. Manufactured in the USA to meet or exceed OEM standards. Seat style shank seat nut; thread size 1/2-20; overall length 1. 65; hex size 13/16; includes 4 Lug Nuts & 4 Washers. Regular shank wheel lug nuts are for use with custom replacement cast or forged aluminum wheels that are between 11/16″ and 7/8″ thick at the stud hole.
BrandMcGard #ad
ManufacturerMcGard #ad
Height3.25 Inches
Length1.5 Inches
Weight0.6 Pounds
Width7.5 Inches
Part Number61000
Model61000
WarrantyWarranty, Parts:PartsWarranty, Labor:To the original purchaser McGard warrants its parts, other than chrome plated lug nuts/bolts, against defects of workmanship and materials for a period of one year. To the original purchaser McGard warrants its chrome plated lug nuts/bolts against defects of workmanship and materials for life. Chrome plating on lug nuts/bolts is warranted for life not to chip, peel or rust under normal use and care. McGard locks are not guaranteed to be theft proof nor does each set have a unique code. McGard reserves the right to make changes in specifications and design without any prior notice, or incurring responsibility.

5. McGard

#ad

McGard 63014 Chrome Extra Long 1.365" Shank Style Lug Nut Set 1/2 X 20 Thread Size, Set of 4

#ad
McGard #ad - Also note the type of seating your lug nuts require to ensure that you are ordering the proper fit. Seat style shank seat nut; thread size 1/2-20; overall length 2.

27; hex size 13/16; includes 4 Lug Nuts & 4 Washers. Mcgard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust. Every lock is through-hardened and tempered. Perform a visual inspection and get the correct shank length and thread measurements to insure a proper fit before purchase and install. Sets contain polished stainless steel washers. Manufactured in the USA to meet or exceed OEM standards. Extra long shank lug nuts for use with wheels requiring extra long shanks, such as Cragar/Weld and Weld Racing wheels.
BrandMcGard #ad
ManufacturerMcGard #ad
Height1.5 Inches
Length7.5 Inches
Weight0.91 Pounds
Width6 Inches
Part Number63014
Model63014
WarrantyLimited Lifetime Warranty

6. Wheel Accessories Parts

#ad

1/2 UNF Spline Lug Nuts with 1 Socket Key, Wheel Accessories Parts Set of 20 Black 1/2 Lug Nuts Closed End Small Diameter ET, Extended Thread 0.32" Shank Length

#ad
Wheel Accessories Parts #ad - Full money back guarantee. Set of 20 lug nuts and 1 key 1/2 unf closed end Spline Tuner 40mm 1. 57" long 7. 87mm Shank. Small diameter lug nuts are heat-treated for the perfect blend of strength and style.

External pattern design produces better torque and prevents breakage. Please verify fitment with an automotive professional before installation. Kit inludes 1 one spline adapter. We would like to issue full refund if finally we could not resolve your problem or you are not satisfied with the result. If you are not satisfied with this product or if you have any question, please feel free to contact us. These extended thread et lug nuts are a special style lug nut intended for installation on aftermarket wheels only. They will not fit on factory OEM wheels.
BrandWheel Accessories Parts #ad
ManufacturerWheel Accessories Parts #ad
Part Number67K542BLK

7. dynofit

#ad

Dynofit 20pc 1/2 2028mm Tall 19mm hex Open End with Conical/Cone Seat Special Extra Safe Lugnuts for Spacers/Adapter or 5 Lugs Aftermarket Wheels Only, 1/2-20 ETExtended 7mm Shank Lug Nuts

#ad
dynofit #ad - Safety: keep around 9-10 full turns thread pitch engagement with your wheel studs or spacer/adapter installation. After-sales: free replacement if missing ones and free return if not as expected! contact us and reply in 24hrs. Specs: 7mm et shank, 1/2 - 20 thread pitch, 19mm hex drive, 28mm tall, 23mm max width, 60 degree conical seat as pic shown!. Material: zinc plated SCM435 high strength steel, clear and clean thread pitch. Package: set of 20 sealed by opp bag in box, fast shipping by amazon.
Branddynofit #ad
Manufacturerdynofit #ad
Part Number8N1220

8. McGard

#ad

20 Thread Size, McGard 60127 Chrome Racing .490" Shank Style Lug Nut Set 1/2", Set of 4

#ad
McGard #ad - For the strip or pro street cars, unscrew the plug to allow the use of extra long NHRA approved studs. Individual sets supplied with polished stainless steel center hole washers unless otherwise noted.

Each one is individually machined from special high quality steel, our lug nuts are proof-load tested to 160, then through-hardened and tempered for strength & durability. Light weight and strong, 000 psi. The triple-nickel chrome plating is guaranteed for life not to chip, peel or rust. Seat style shank seat nut; thread size 1/2-20; overall length 1. 60; hex size 13/16; includes 4 lug Nuts-4 Washers & 4 Black Plugs. Drag racing short Style. 490" shank. Bulk boxes do not contain washers. For street use, the black nylon allen plug can be left in place.
BrandMcGard #ad
ManufacturerMcGard #ad
Height1.5 Inches
Length7.5 Inches
Weight0.64 Pounds
Width3.25 Inches
Part Number60127
Model60127
WarrantyLimited Lifetime Warranty