As an Amazon Associate I earn from qualifying purchases.
1. Permatex #ad
50 ml Tube, Permatex 51813 Anaerobic Gasket Maker #adPermatex #ad
- Ideal for on-the-spot and emergency repairs, or when a conventional gasket is unavailable. Parts disassemble easily even after extended service and old gasket material can be removed in minutes with a simple putty knife.
Suggested applications: water pumps, transaxle casings, transmission case covers, thermostat housings, transmission pans, o-ring replacement. Original equipment Manufacturer OEM specified, non-corrosive material. Fills gaps up to. 015" and cures to a solvent-resistant seal that will not tear or decay during service.
2. Loctite #ad
Loctite 555352 515 Gasket Maker Flange Sealant Tube, 50-Milliliter #adLoctite #ad
- Water pumps, thermostat housings, transmission case covers, transmission pans, transaxle casings and O-ring replacement. Flexible gasketing material for use on rigid machined flanges with less than 0015" 0381 mm gap.
Design. Oem approved use where oe’s specify 515 or “anaerobic” gasket cures in absence of air. Temperature. Sealing time. Specified. Applications. Product set in 15 minutes to 2 hours with primer or 1 to 12 hours without prime. O. E. M. The temperature range is -65° to 300°F -54°C to 149°C.
3. Loctite #ad
1 Pack, 50ml/1.69oz, Loctite 2096059 Gasket Maker 518 Anaerbc #adLoctite #ad
- Fit type: Vehicle Specific. Package dimensions: 3. 5 l x 17. 2 h x 9. 5 w centimeters. Designed primarily for use on aluminum, iron, and Steel flanged mating surfaces. It's ideal for on-the-spot emergency repairs, or when a conventional gasket is out-of-stock. Package weight : 006 kilograms.
4. Permatex #ad
5 oz., Permatex 29208 The Right Stuff Gasket Maker #adPermatex #ad
- Seals instantly, pre-cut, paper, forming a reliable, long lasting elastomeric rubber gasket; eliminates the need for pre-formed, rubber or cork gaskets.
Formulated to meet or exceed performance standards for long-term sealability, durability and handling; this material is used on OEM production lines and specified in their service parts programs. Blowout resistant, allowing leakproof gaskets to be made in just one minute; protects against leaks and seepage caused by vibration and thermal expansion.
Temperature range: -75°f to 450°f -59°c to 232°c continuous, 500°F 260°C intermittent. Suggested applications: automotive, and marine gaskets, pumps, valve covers, thermostat housings, heavy duty, gearbox covers, oil pans, water pumps.
|Warranty||1-Years for defects in material and/or workmanship|
5. Permatex #ad
Permatex 27037 Optimum Black Gasket Maker 3.35 oz, 1 Pack #adPermatex #ad
- Meets performance specs of oe silicone gaskets. Temperature range: -65 degreef to 500 DegreeF -54 DegreeC to 260 DegreeC intermittent. Includes 2 nozzles. Retains highest flexibility with maximum oil resistance through use of a patented adhesion system.
Resistant to Auto & shop fluids and vibration. 60% more flexible than Ultra Black. 15% stronger than Ultra Black. Sensor-safe, low odor, and non-corrosive.
6. Permatex #ad
3 oz., Permatex 81182 Gear Oil RTV Gasket Maker #adPermatex #ad
- Specially formulated to withstand the harsh gear oil environment found in differentials and transfer cases. Sensor safe, non-toxic, and non-flammable.
Seeks and seals leak paths that cut gaskets cannot. Tested to original Equipment Manufacturer OEM specifications to ensure complete sealing power. Specialty silicone does not break down against gear oil friction modifiers.
7. Permatex #ad
9.5 oz. PowerBead Can, Permatex 85080 Ultra Black Maximum Oil Resistance RTV Silicone Gasket Maker #adPermatex #ad
- Suggested applications: Valve covers, timing covers, intake manifold end seals, oil pans, and differential covers. Temperature range -65°f to 500°f -54°C to 260°C intermittent. Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants.
Sensor-safe, non-corrosive formula designed for superior adhesion to oily surfaces and long term durability. Retains high flexibility and eliminates the need for pre-formed, pre-cut, paper, rubber or cork gaskets; OEM specified and approved for dealership warranty requirements.
8. DB Electrical #ad
Anaerobic; 50 mL Tube Compatible With/Replacement For Universal, New DB Electrical 49477 Dynatex Gasket Maker #adDB Electrical #ad
- Compatible with/Replacement for Universal. 1-year warranty protects you after your purchase. 100% new aftermarket maker, anaerobic built to meet OEM specifications. Specs: shop Supplies, Non Solder.