Top 7 Epoxy Paint for Metal – Spray Paint

As an Amazon Associate I earn from qualifying purchases.

1. VHT

#ad

VHT SP652 Satin Black Epoxy All Weather Paint Can, 11 oz.

#adVHT #ad - This item is not for sale in Catalina Island. Does not require use of primer. Gives the appearance of a baked-on finish. Epoxy all weather paint is a one step epoxy coating. Chemical, corrosion, rust and salt resistant.

Brand	VHT #ad
Manufacturer	VHT #ad
Height	7.95 Inches
Length	2.61 Inches
Weight	0.94 Pounds
Width	2.61 Inches
Part Number	SP652
Model	SP652

2. POR-15

#ad

1 quart, POR-15 45404 Rust Preventive Coating Semi-Gloss Black

#adPOR-15 #ad - Seals Rust Permanently. Lead-Free. No need to remove Rust Before Applying. For metal Substrates. Professional Use.

Brand	POR-15 #ad
Manufacturer	POR-15 #ad
Height	5 Inches
Length	4.25 Inches
Weight	2.4 Pounds
Width	4.25 Inches
Part Number	45404
Model	45404
Warranty	LIMITED WARRANTY

3. TCP Global

#ad

TCP Global Brand Professional New 2.5mm Hvlp Spray Gun- Great for High Build Auto Paint Primer, Metal Flake Application and Any Heavy Bodied Paint or Primer Material -with Air Regulator

#adTCP Global #ad - Contains a stainless Steel Needle and Nozzle Set. Gun has a full baffle head assembly that enables it to produce a Fully Atomized and Consistent Spray Pattern for a Smooth Professional Finish! Full one Year Warranty.

Spray gun has control knobs for full adjustment over Spray Pattern, Fluid Control and Air Pressure. The 2. 5 mm fluid tip enables you to spray really thick materials such as Extreme High Build or Polyester Primers, Chip Guard, Metal Flakes, Gel Coats, Thick Enamels, Latex Paints, Etc. Tcp global brand high performance hvlp spray gun with a 2. 5 mm fluid tip, 1 liter Aluminum Cup and a Air Regulator.

Brand	TCP Global #ad
Manufacturer	TCP Global #ad
Weight	4 Pounds
Part Number	G6600-25
Model	TCP G6600-25

4. Raptor

#ad

Raptor 4:1 Anti-Corrosive Epoxy Primer Kit UP4831 Gray 1L

#adRaptor #ad - It contains a blend of anti-corrosive additives to inhibit rust and corrosion and offers excellent salt spray resistance. Can be applied wet on wet. Raptor anti-corrosive epoxy primer is a 2k high performance primer specifically designed to be used under RAPTOR Protective Coating to further extend the protective and anti-corrosive properties of RAPTOR.

1l covers approximately 60 sq feet at 3 MIL. Salt spray resistance test completed at >1000 hours according to ASTM B117 at an independent laboratory. The advanced resin technology in raptor anti-corrosive Epoxy Primer improves adhesion to bare metal and most other prepared surfaces, and promotes intercoat performance to further extend the life of RAPTOR protective coating. Can be applied directly over surface rust. Fit type: Universal Fit.

Brand	Raptor #ad
Manufacturer	U-POL Ltd #ad
Height	5.3 Inches
Length	6.6 Inches
Weight	3.66 Pounds
Width	5 Inches
Part Number	UP4831
Model	UP4831

5. Magnet Paint

#ad

1 Gallon, Magnet Paint UCP99-01 Chassis Saver Rust Preventative Paint Gloss Black

#adMagnet Paint #ad - Easy to apply – make contact directly to rust spots or places to protect against rust; only requires minimal surface preparation using a wire brush; no hardeners, primers, topcoats, activators required. Committed to total statisfaction - under the harshest condition, Chassis Saver has proven itself for over 10 years! Over 350 townships, local DOT fleet maintenance and public works departments use Chassis Saver.

Protects from hard weather; snow, rain, chip, mud, flake, and dirt. Active guarding – proactively shields vintage trucks and automobiles underbody surfaces including frames, fire walls, rocker panels, engine compartments, floorboards, under fenders, behind bumpers, trunk areas, etc.

Chassis paint finish wont crack, or peel. Unafftected by other substances – this formula is unstoppable! chassis Saver is unchanged by diesel fuel, corrosives, road salt, solvents, hydraulic fluids, battery acids, gasoline, oils, or chemicals. General maintenance – the ucp99 gloss black is the industry’s standard in high performance rust guard.

Brand	Magnet Paint #ad
Manufacturer	Magnet Paint Co #ad
Height	7.7 Inches
Length	6.7 Inches
Width	6.7 Inches
Part Number	UCP99-01
Model	UCP99-01

6. POR-15

#ad

POR-15 40201 Metal Prep, 1 gal

#adPOR-15 #ad - Creating an ideal anchor pattern for coatings such as POR-15. Avoid other preps that may leave harmful residues which prevent proper adhesion. Simple process gently etches metal.

Brand	POR-15 #ad
Manufacturer	POR-15 #ad
Height	4.53 Inches
Length	2.76 Inches
Weight	1.53 Pounds
Width	1.57 Inches
Part Number	40201
Model	40201

7. PJ1

#ad

12 oz, PJ1 16-GLS Gloss Black Epoxy Spray Paint Aerosol

#adPJ1 #ad - Pj1 fast black epoxy paint provides a high gloss, porcelain-hard finish for all motorcycle frames and other metal components that require a factory-like durable finish. For increased protection and an even higher luster gloss topcoat with PJ1 Epoxy Gloss Clear. Dirt and mud wash right off with soap and water. Pj1 gloss clear epoxy paint is easy to apply and is both chip and scratch resistant. Guards against rust and corrosion.

Brand	PJ1 #ad
Manufacturer	PJ1 #ad
Height	7.7 Inches
Length	6.4 Inches
Weight	1 Pounds
Width	2.8 Inches
Part Number	16-GLS
Model	16-GLS
Warranty	No warranty