Top 10 Trailer Fender Lights – Trailer Lighting

As an Amazon Associate I earn from qualifying purchases.



2pc 7" Amber + Red LED Trailer Fender Light Set DOT Approved SAE P2 IP67 Waterproof Trailer Clearance Marker Lights for Boat Utility Trailer Hauler Car

ONLINE LED STORE #ad - Instead of installing, wiring and maintaining two separate clearance lights, chose our one-and-done combination LED fender light. Our lights are ip67 rated for full submersion, water, and are the ideal choice for boat and utility trailers that see a lot of water.

So you can feel confident that you're installing a light that is bright, safe, durability, and legal. Cable management - the extended cable housing allows you to place your lights farther out for better visibility without compromising on protection for your wiring. Easy and secure - with the included 60" of wiring you won't need to worry about buying extra wire. And because our lights are secured by 6 mounting screws you can be confident that once you install it, it's not going anywhere.

Save money - save yourself time and money with this combination red and amber fender light. Waterproof - trailers see the worst of the weather, snow, and dirt, and wind can take a toll on weak trailer lights. Dot compliant - our clearance lights are dot fmvss 108 compliant and meet the requirements for build quality, and visibility.
ManufacturerONLINE LED STORE #ad
Height4 Inches
Length7 Inches
Width6 Inches
Part NumberSIL0756

2. Nilight


Nilight 2PCS LED Trailer Fender Lights Pre Wired Trailer Clearance Marker Lights Amber Front Red Rear for Trailer Trucks,2 Years Warranty

Nilight #ad - Main purpose: designed in dual faces mounted on the top of fenders, work as both front and rear clearance marker lights, easily help you and other drivers behind identify the widest point of trailer, ensuring a safer drive & better protection.

High visibility light: both left and right fend light use 14PCS led diodes, 7PCS for amber light at front and 7PCS for red lights at rear, output highly visible marker light for your enclosed trailer. Simple & tidy installation: lights are pre-wired with connectors and designed with extended bracket housing, offer you a quick wire connection and convenient and tidy wire routing, protecting it from exposure and damages.

Application: can be widely used on 12V trailer trucks, freightliner, emergency vehicles and service vehicles etc. Wires connection: comes with about 7” wire lead, wire gauge 22AWG, black wire with ring terminal to ground, red wire to 12V positive tail light wire.
BrandNilight #ad
ManufacturerNilight #ad
Part NumberTL-43
Warranty2 Years Warranty

3. Partsam


Partsam Set RED AMBER LED Trailer Fender Bullet 3/4" Led Clearance Marker Light Left Right

Partsam #ad - Sealed, waterproof lenses. For trailers over 80" wide. The bracket has 1 amber front clearance light and 1 red rear clearance light. Housing dimensions: please check the pictures in the listing.

2-wire design - includes ground wire and lead wire for powerblack is positive and White is negative; Installs on left fender driver's side of trailer & right fender passenger's side of trailer, NO SCREWS INCLUDED;. Partsam setright&left bright red and amber led Trailer Fender Marker Lights; Pre-wired assembly mounts on top or side of fender. Led fender lamps utilizing low profile single-diode led lamps mounted into an equally low profile housing these lamps are durable, attractive and inexpensive.

The led lights are 3/4" Round. Pre-wired fender light assembly mounts on top or side of your fender to mark the widest point on your trailer. Amber led light points toward front of trailer to act as front clearance light; Red LED light faces rearward to act as rear clearance light.
BrandPartsam #ad
ManufacturerPartsam #ad
Part Number185218

4. Partsam


Partsam 2x 4" LED Clearance Trailer Fender Lights Amber Front Red Back 4 Diodes RH / LH

Partsam #ad - Set pre-wired fender clearance Trailer Light Assembly - RH & LH. This dual-light, pre-wired assembly for the fender functions as both the amber front and red rear clearance lights for trailer applications more than 80" wide. The assembly contains two lights with 4 Diodes each on a black, molded plastic bracket. The bracket mounts on the top or side of most fenders to mark the widest point of the trailer. Both driver side & passenger Side are includedRed is positive and black is ground.
BrandPartsam #ad
ManufacturerPartsam #ad
Weight0.84 Pounds
Part Number161840

5. Dream lighting


Chrome Shell, Dream Lighting 12Volt DC 8.5inch Amber & Red LED Trailer Fender Lights Double Face Led Side Marker Clearance Lighting for RV/Truck/Boat/Cargo, Pack of 2

Dream lighting #ad - The treatment of epoxy sealing LEDs board makes sure it available in humid weather, waterproof rate is IP65. Mounting screws are not included. Whole light takes use of qualified lightweight PC material, ensures it fixed sturdy.

It consumes 04 watts low power and generates little heat, so that it will not take any power burden to the vehicles battery. It is super convenient for the surface mount construction. Specially double face designed, boats, takes use of high quality LED chips to emit amber & red watchful side marker lighting for 12V DC power applications like cars, trucks, 4WD, rv, etc.

The chrome shell is snap-on the double face amber & red light body. This light conforms to the requirements of DOT certification and FMVSS108 Certified. The part of led light can be 180 degrees reversed to match the vehicle's left and right side lighting. Black wire is positive, white wire is negative.
BrandDream lighting #ad
ManufacturerJerrylight Pty Ltd #ad
Part NumberFL1-CHR-LIGHTX2
Warranty1 year manufacturer

6. Partsam


LED Trailer Fender Light Set/2, Double Face 4" LED Marker Clearance Lights 7Diode

Partsam #ad - Amber clearance light facing forward and red Clearance light facing backwards. Both right side and left side are included. Typical trailer light, works as you would imagine; fender marker lights; Day and Night they are highly visible which make for safer traveling;.

Pair double-face dual-light pre-wired fender clearance Trailer Light Assembly - Driver Side & Passenger Side. Each light is on a black, molded plastic bracket. Great replacement for traditional light units on trailer; easy to mount, easy to connect; perfect replacement for an enclosed trailer fender lights;.

Function as: both the amber front and red rear clearance lights for trailer applications more than 80" wide. Wonderful and perfect lights to mount on your truck or trailers side fenders. Led qty: 7 diodes on each light. The led lights are 3/4" by 4" approx. Each led is directly wired and water-tight sealed. Size: 8-1/4" long x 4" wide x 1 3/4" high approx.
BrandPartsam #ad
ManufacturerPartsam #ad
Weight0.77 Pounds
Part Number155749

7. Kaper II


Amber / red, Kaper II Auxiliary Light incandescent, #194 lens material: polycarbonate lens housing material: abs base., 4.08" X 1.08" Rating: Rated: p2 pc 99 mount: fender mount only connection: standard 2-pole plug lens color: red/amber tested voltage: 12.8 Volts Lamp: 2 bulb

Kaper II #ad - Country of origin: china. Package quantity: 1. Fit type: Universal Fit. Package dimensions: 2. 54 cms l x 3. 302 cms w x 2. 54 cms h. Product type: vehicle light assembly.
BrandKaper II #ad
ManufacturerKaper II #ad
Height1.2 Inches
Length3.85 Inches
Weight0.06 Pounds
Width1.2 Inches
Part Number1A-V-1260AR
Warranty1 Year

8. Kaper II


2-diode, amber/red in the same light, two 450mm wires., Kaper II Auxiliary Light right side, designed for fender-mount

Kaper II #ad - Package weight: 0009 kilograms. Long life led technology. Package dimensions: 17. 78 l x 3. 81 w x 1. 777 h centimetres. Low energy draw extends battery life. Right Fender Light.
BrandKaper II #ad
ManufacturerKaper II #ad
Height2.1 Inches
Length6.45 Inches
Width1.14 Inches
Part NumberL04-0040R
Warranty5 Years

9. Anxingo


2PCS 4" LED Clearance Trailer Fender Lights Trailer Light Assembly Amber Front Red Back 4 Diodes Right + Left

Anxingo #ad - Connection: Red is positive and black is ground. Installation: pre-wired assembly mounts on top or side of fender to mark the widest point of the trailer. Packing: two lights, equipped with 4 diodes each on a black, molded plastic bracket. Features: weather and corrosion resistant; Replaceable lenses and bulbs. Application: for the fender functions as both the amber front and red rear clearance lights for trailer applications more than 80" wide.
BrandAnxingo #ad
ManufacturerAnxingo #ad
Part NumberGELJ394

10. gpd


2 LED Trailer Fender Mount Lights Amber/Red Side Marker Clearance

gpd #ad - One pair of led amber / red clearance or side marker lights fender mount ap cation Amber Faces Forward, Red Faces Rear Sonic Welded Lens to form Weatherproof and Vibration Resistant Housing Includes Grey ABS Mount with Wire Installed/UL.
Brandgpd #ad
ManufacturerGPD #ad
Weight0.25 Pounds
Part Number777KIT1553