Top 10 Pruveeo Dash Cam Mount – GPS Vehicle Mounts

As an Amazon Associate I earn from qualifying purchases.

1. Sportway


Sportway S30 Dash Cam Suction Mount 2nd Gen with 10pcs Joints for REXING,Z-Edge,Old Shark,YI,KDLINKS,Falcon Zero,Transcend,Crosstour,VANTRUE,GoPro Hero and Most Other Dash Cameras DVR GPS

Sportway #ad - 360 degree rotation design, rotate ball adapter head provides flexibility for positioning the dash cam. Easy to install, remove the suction cup protective film and attach to a Clean and smooth surface to get Maximum holding strength on the Windshield.

S30 with 10pcs different joints, old shark, z-edge, crosstour, gopro hero. For the corresponding brand and model, such as rexing, vantrue, black Box, KDLINKS, Falcon Zero, Transcend, YI, suitable for most popular brand dash cam, please check the picture. Easier to use than 3m double-Sided Adhesive Mount Holder Bracket, no harm to car glass. The mount uses pom and abs plastics, tolerable temperature range is :-40℃~120℃;the suction cup uses PVC material, tolerable temperature range is :-20℃~70℃, and bearing weight up to 5kgs11 lb.
BrandSportway #ad
ManufactureriSportgo #ad
Height2.95 Inches
Length2.17 Inches
Weight0.12 Pounds
Width2.17 Inches
Part NumberS30

2. TiToeKi


UGSHD and Most Dash Cameras, TiToeKi Dash Cam Suction Mount with 10+ Swivel Ball Adapters Compatible with Rexing V1, Byakov, UGSHD, Z-Edge, Old Shark, YI, APEMAN, Roav, Pezt, AUKEY

TiToeKi #ad - Not compatible Garmin Dash Cam. Come with 10+ different joints,suitable for 99% dash cam, Different joints kit to suit most Car Dash Camera, GPS, Action Camera. Please attaching to a clean And Smooth Surface To Get Maximum Holding Strength. Sturdy and heat resistant, the windshield under the scorching sun, the suction cup bracket can still maintain a strong suction. What you get - 1 x dash cam mount holder, 15+ different pivot swivel points. Adjustable neck with 360 degrees rotating holder, Easy to install and easy to use.
BrandTiToeKi #ad
ManufacturerTiToeKi #ad
Part NumberTiToeKi



G-Sensor, Dual Front and Inside, 170° Wide Angle, Pruveeo C2 1080P Dual Dash Cam 2.7 inch LCD with Infrared Night Vision,G-Sensor, Loop Recording ,24H Parking Monitor for Cars Truck Taxi Drivers

PRUVEEO #ad - Dual 1920*1080p dash cam front & interior dual fhd 1920x1080p cameras, the dual cameras simultaneously capture the front and interior at 1920x1080P 30fps. Both cameras utilize Sony IMX323 sensors for Truck Taxi Drivers. Night vision and sony sensor the interior camera utilizes four infrared lights and has an F1.

8 aperture. The dash cam works automatically, it starts recording when the engine is turned on and stops when it is turned off. Front & inside parking monitor you need to purchase a hardwire kit with low battery voltage detection to leave it running when parked not included. Loop recording loop recording allows continuous use by writing over old, unneeded footage for efficient storage management. Signature low-profile design allows the dash cam to be a well-hidden witness to the road ahead.

G-sensor&auto incident detection the dash cam will automatically lock the current recording video as a proof of an incident once the built-in G-sensor detects a collision. Or utilize the front camera only to record the front at [email protected] or [email protected] The locked files will NOT be overwritten by Loop Recording. The installation is simple and convenient. Both cameras can be rotated 180 degrees forward and backward, 50 degrees left and right.
BrandPRUVEEO #ad
ManufacturerPruveeo #ad
Height1.48 Inches
Length4.88 Inches
Width3.37 Inches
Part NumberPruveeo-C2

4. Wikkiv


Vantrue N2 Pro, Dash Cam Mirror Mount Kit with 10+ Different Joints Suitable for APEMAN, Peztio Etc Dash Cam and Car DVR Camera GPS., Crosstour, AUKEY, Rexing V1, YI 2.7"

Wikkiv #ad - Easy to install and remove, the soft padding ensures a firm mount and avoids damaging the surface to your rear view mirror pole. Real 360 degree rotation design allow you to adjust and position your dash cam as you please, be it horizontally or vertically, providing the perfect viewing angle.

Comes with 10+ different joints, pathinglek, zhiroad, Rexing, Yi, trekpow, YI Nightscape,Roav, works well with Vantrue N2 Pro, byakov, oldshark and most other dash cameras. Ultra-slim 9. 70mm design, and clamping diameter range:13-65mm05-25. 6in, very easy to install and suit most of car rearview mirrors MIRROR POLE AT LEST 04”. Not compatible Garmin Dash Cam. Mount your dash cam behind car rearview mirror, without blacking your drivers’ view, prevents your dash cam from swinging or falling down. Anti-skidding and protectiveness.
BrandWikkiv #ad
ManufacturerWikkiv #ad
Part NumberWikkiv

5. milsense


Hold Tightly Removeable Easy to Install and Stand Heat, Black Box G1w Dash Camera etc, 2 Pcs, Suction Cup Mount for Yi Dash Cam 2.7', Uniden Dashcam

milsense #ad - We provide 2 suction mounts, we just want to give you more benefit. One year guarantee. Any problem in one year, but it doesn’t mean they are poor quality, just get a new one or MONEY BACK.

Stick to window strongly and stand heat well. Simple structure and friendly design, easy to install, easy to remove and reposition, EASY to adjust angle of the yi Smart Dash Cam to get a good view. Fits most popular dash camera for cars, such like g1w/ YI camera dash /Z-Edge/BlackBox/Spy Tec/Transcend/DOD/Papago/Vicovation/HP. Our experiment shows this suction mount can hang up 9 POUNDS of cola, the yi car camera weights about 05 pound, this suction cup mount can hold the YI dash cam tightly even in a bouncy work truck.
Brandmilsense #ad
ManufacturerMILsEnse #ad
Part NumberXIPAN

6. Sportway


Z-Edge, Sportway S40 Dash Cam Suction Mount 3rd Gen with10pcs 360 Rotating Joints Compatible for Rexing, Yi, DVR, Crosstour and Most Dash Cameras, TOGUARD, Old Shark, Kingslim, Compark, GPS

Sportway #ad - Just make sure to remove all air from underneath. Easy to install just tear off the protective film, choose the suitable position. Secure & stable sportway dash cam mount featured with upgraded super strong suction cup, even on the bumpiest road, It is still easy to sticks securely on the windshield or dashboard.

Remove the mount easily by pulling the suction clip without leaving any nasty marks. Universal compatible s40 comes with 10pcs difference joint kits, v1p 3rd, compark, Kingslim, suitable for most 99% dash cam, old shark, v1p pro, V1P MAX, Such as Rexing V1 Max, Z-Edge, Yi, Crosstour etc. Just enjoy the best driving experience.

The suction cup used PVC material, diameter 55cm. Make sure to remove all air from underneath to get Maximum suction strength on the Windshield. 360 degrees rotation adjust the 360 degrees joint to get any angle you need, providing you with the best viewing to keep secure driving. Premium quality the dash cam mount uses pom+abs plastic, Sturdy and heat resistant.
BrandSportway #ad
ManufacturerSportway #ad
Height2.95 Inches
Length2.17 Inches
Width2.17 Inches
Part NumberS40

7. Anumit


Z-Edge, Anumit Universal Dash Camera Rear View Mirror Mount Holder Kit for YI, Rexing, E-ACE, KDLINKS X1, Anker Roav, APEMAN, CHORTAU, Old Shark, Peztio and Most Other Dash Cam, Dash Cam Mount, Aukey

Anumit #ad - Perfect compatibility: new 16 different joints kit suitable for 99% not all dash camera, gps and more. Kindly check pictures for reference before purchased. Best dash cam companion: mount your dash cam behind the center of the windshield to make a safe driving, since it allows them to record a clear unobstructed view ahead and doesn't interfere with the view when driving.

Anti-skidding and protectiveness: Position fixing with practical locking nut, durable construction prevents slipping and breaking and heat-resistant, dashcams for cars never fall off the windshield. The ball dia of the dash cam mount is 063inch. Strong pipe mount: tool-less and easy to install & removed, the mirror dash cam mount would be easy to lock on car rear view mirror/bike/motorcycle handlebar and any round pipe dia, Come with two long screws and two short screws, From 0.5

5- 2. 6 inches. For easy installation, action Camera, please make sure the car rearview has MORE THAN 04 inch space on the back of the mirror. 360° rotation freedom: adjustable ball and socket joint, real 360-degree rotation design, adjust to any angle you need, be it horizontally or vertically, the dash cam mirror mount is completely at your disposal.
BrandAnumit #ad
ManufacturerAnumit #ad
Part NumberAnumit
ModelAnumit 1058



Near 360 Degree Wide Angle Lyft Dual Car Cam with Parking Mode, 1080P Inside and Outside Dual Dash Camera, Front Camera Night Vision, Motion Detection, Vantrue N2 Uber Dual Dash Cam, 1.5 inches LCD

VANTRUE #ad - Satisfied service w/ optional gpsfree for 18 months warranty to cover any questions and email replies within 24 hours. Triggered by time lapse, the dash camera dual will continue to take photos at a set time interval. Loop recording will cover the oldest lens when the capacity of the card is full.

Perfect for uber/taxi/Rideshare drivers or people who like to record the journey. Built in microphone/speaker for sound recording. It needs a constant power supply either from an external battery pack or hardwire Asin: B07G9WTWB9. Dual hd cameras front and inside recordingdual cam recording simultaneously capture the license plates cars as well as road signs with [email protected] front and the cabin [email protected] Suitable for uber and lyft drivers, location and speed To use GPS function, private car, total peace of mind.

Auto lcd off after the recording begins so you won't be disturbed by another glowing rectangle on your windshield. Seamless loop recording and g-sensorsupport up to 64gb card not included, please format it to fat32 first. The rear cam is easily adjustable 80°vertically for the perfect view. Easy to install and operate. With the hdr technology, 6 glasses lens and efficient processors, F/2. 0 aperture, this car camera balance the exposure perfectly and provides high quality video with more details even in low light condition.
BrandVANTRUE #ad
ManufacturerVANTRUE #ad
Height4.49 Inches
Length3.86 Inches
Weight0.23 Pounds
Width5.35 Inches

9. QveeQ


Z-Edge Z3 3" and Most Other Dash Cam with 16 Different Points, 3 x Glue Double Sided Adhesive Tapes, Dash Cam Suction Cup Mount Compatible with Crosstour, YI 2.7", APEMAN, 3 WipesDry and Wet

QveeQ #ad - Easy to install and remove, no residue. The dashcam mount compatible with byakov, roav, apeman, rexing v1, YI 2.7", yi nightscape, old shark Dash Cam,Anker dash cam etc. Get the most adsorption. A 360-degree rotating ball adapter head for flexible positioning of the camera. Wipe the windshield and the bottom of the suction cup with alcohol cotton. Not compatible Garmin Dash Cam. Come with 9 different joints, suitable for 99% dash cam.
BrandQveeQ #ad
ManufacturerQveeQ #ad
Part Number3M-24



V1 3rd Gen, Rexing Suction Cup Mount for V1, V1P, V3

REXING #ad - Note: this mount does not support the V1P 3rd Generation, V1P Pro or V1LG. Suction cup mount compatible with Rexing V1, V1 3rd Generation, V1P, V3.
BrandREXING #ad
ManufacturerRexing #ad
Part Number4350459730