As an Amazon Associate I earn from qualifying purchases.
TEKTON #ad - Offset drive with wire gate accesses sensor from the side, not the top, preventing damage to wires. High-performance chrome molybdenum steel construction.
A ABIGAIL #ad - Our aim is to make you satisfy the parts and the service we provide for you. This high quality tool can save your time! Package1-pc 3/8” dr. Extra deep broach socket 3-1/8” long, 1-pc 1/2” dr. Use built for use with ratchets and breakers bars to remove and install oxygen sensors and hex vacuum switches on vehicle, even if you don't have a lot of experience working with cars.
Material made from high performance chrome molybdenum and solid cast steel construction for strength and durability - Finished with Black Oxide to prevent rust.
Design standard 6 point with low profile and slotted design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots. Service100% satisfaction guarantee, if you have any issues with the Oxygen Sensor Socket Wrench and Thread Chaser Set, simply contact customer service for troubleshooting help, parts, replacement, or refund.
Apeixoto #ad - Quality - constructed from drop forged heat-treated chrome-vanadium steel CR-V for strength and longevity; Black phosphate finish for corrosion resistance.
Warranty - whether it is the quality of the products or your payment, which will always provide customer support. If either actuator fails simply contact us for a replacement. Size - fits standard oxygen sensors with a 7/8” hexagon nut; 7mm slot, 7/8” 22mm x 6-point x 3-1/10” 80mm length, 3/8 inch square drive for use with ratchet.
YCT #ad - This socket made from premium Chrome Molybdenum steel, the socket allows users to exert maximum torque while the precision casting ensures accurate fit and function. The sensors live in the harshest of environments and may require some elbow grease to remove, but this quality tool can save your knuckles and save you time! Thank you! Even if you don't have a lot of experience working with cars, you can replace your O2 sensor with this tool to help with your car's emissions and gas mileage.
A ABIGAIL #ad - High qulitymade of high performance chrome molybdenum and solid cast steel construction for strength and durability - Finished with Black Oxide to prevent rust and corrosion. Fits all standard oxygen sensors with a 7/8” hexagon nut.
This high quality tool can save your time! Service100% satisfaction guarantee, simply contact customer service for troubleshooting help, parts, if you have any issues with the oxygen sensor socket, replacement, or refund.
Designstandard 6 point with low profile and 8mm x 64mm side cutout design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots. Our aim is to make you satisfy the parts and the service we provide for you. Size 7mm slot, 7/8” 22mm x 6-point x 3-1/10” 80mm length, 3/8 inch square drive for use with ratchet.
TEKTON #ad - 22mm socket fits most oxygen sensors. Removes and installs oxygen sensors on vehicles with computer-controlled engines. Side cutout prevents damage to wires.
A ABIGAIL #ad - Material made from high performance chrome molybdenum and solid cast steel construction for strength and durability - Finished with Black Oxide to prevent rust. Design standard 6 point with low profile and slotted design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots.
3/8 inch square drive for use with ratchet.
Our aim is to make you satisfy the parts and the service we provide for you. Size 7/8 inch 22 millimeter hex fits almost all oxygen sensors. Use built for use with ratchets and breakers bars to remove and install oxygen sensors and hex vacuum switches on vehicle, even if you don't have a lot of experience working with cars.
ITEQ #ad - Special side cutout design allows easy access to oxygen sensors from any section and prevents damage to wires. 3 types of universal socket wrenchs cover various situations of oxygen sensor location.
Offset crowfoot socket wrench 1-15/16” long, 1-pc 3/8” Dr. Low-profile crowfoot socket wrench 1-1/4” long, 1-pc M18 x 1. 5mm and 1-pc M12 x 1. 25mm thread chasers with 3/8” drive to clean and repair damaged threads.
ARES #ad - This tool meets and exceeds ANSI/ASME standards. Quality: made from premium chrome molybdenum steel, the oxygen sensor socket allows users to exert maximum torque while the precision casting ensures accurate fit and function. The 6-point beveled nose of this 7/8-Inch 22mm socket fits oxygen sensors on a wide variety of vehicles.
The sensors live in the harshest of environments and may require some elbow grease to remove, but this oxygen sensor socket can save your knuckles and save you time! Reliable | effective | efficient: users trust ares to be quality tools. This 3/8-inch drive oxygen sensor socket is also offset and compact which allows for extra leverage even in hard to reach spots.
Ares offers a full line of oxygen sensor tools including our complete 70318 oxygen Sensor Socket set that features thread chasers, oxygen sensor sockets and more! Why you need it: even if you don't have a lot of experience working with cars, you can replace your O2 sensor with this tool to help with your car's emissions and gas mileage. If you have any issues with your areS Offset Oxygen Sensor Socket, replacement, simply contact customer service for troubleshooting help, parts, or refund. You are backed by our Performance Assurance Limited Lifetime Warranty.
Aoerzn #ad - The aoerzn advantage: Join our customer groups, and enjoy more excellent auto parts. Convenient: the socket is slotted so that you can remove the oxygen sensor while still connected to the wiring harness, and the socket is offset and compact, providing additional leverage even in hard-to-reach spots.
Welcome guide, high quality assurance and friendly customer service.
I believe this product can fully meet your requirements. Use with any 3/8 inch drive ratchet or breaker bar. It’s very handy. High-quality materials: this offset oxygen sensor socket is made of premium Chrome Molybdenum steel, which enables maximum torque while being accurately cast to ensure accurate assembly and function.
1. TEKTON
#adTEKTON 3/8 Inch Drive x 7/8 Inch Offset 6-Point Oxygen Sensor Socket | 47749
#adMore information #ad
Common 6 point, 7/8 in. Removes and installs oxygen sensors on vehicles with computer-controlled engines. Use with any 3/8 inch drive ratchet or breaker bar. 22mm socket fits most oxygen sensors.| Brand | TEKTON #ad |
| Manufacturer | TEKTON #ad |
| Height | 1.2 Inches |
| Length | 2.2 Inches |
| Weight | 0.34 Pounds |
| Width | 1.4 Inches |
| Part Number | 47749 |
| Model | 47749 |
| Warranty | Always Guaranteed: [email protected] |
More information #ad
2. A ABIGAIL
#ad5 PCS Automotive O2 Oxygen Sensor Socket Offset Wrench Remover Tool and Thread Chaser Tool
#adMaterial made from high performance chrome molybdenum and solid cast steel construction for strength and durability - Finished with Black Oxide to prevent rust.
More information #ad
Low-profile crowfoot socket wrench 1-1/4” long, 1-pc M18 x 1. 5mm and 1-pc M12 x 1. 25mm thread chasers with 3/8” drive to clean and repair damaged threads. Offset crowfoot socket wrench 1-15/16” long, 1-pc 3/8” Dr. Design standard 6 point with low profile and slotted design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots. Service100% satisfaction guarantee, if you have any issues with the Oxygen Sensor Socket Wrench and Thread Chaser Set, simply contact customer service for troubleshooting help, parts, replacement, or refund.
| Brand | A ABIGAIL #ad |
| Manufacturer | A ABIGAIL #ad |
| Part Number | A7841F |
More information #ad
3. Apeixoto
#adOxygen Sensor Socket with Side Wire Cutout 3/8” Inch Drive x 7/8” 22mm fits All Vehicle O2 Removal and Installation Offset Oxygen Sensor Socket
#adWarranty - whether it is the quality of the products or your payment, which will always provide customer support. If either actuator fails simply contact us for a replacement. Size - fits standard oxygen sensors with a 7/8” hexagon nut; 7mm slot, 7/8” 22mm x 6-point x 3-1/10” 80mm length, 3/8 inch square drive for use with ratchet.
More information #ad
Disign features- the size of the open side is 8 mm, the length: 80mm, Side cutout prevents damage to wires. 100% brand new and never used This Genuine Part Is guarantee By Factory Warranty.| Brand | Apeixoto #ad |
| Manufacturer | Apeixoto #ad |
| Part Number | AP1008K |
| Model | 13 |
More information #ad
4. YCT
#adUniversal for Most Models of Cars Oxygen Sensor Offset Puller, Offset Oxygen Sensor Socket 3/8-Inch Drive by 7/8-Inch 22mm Wire Gate Accesses Sensor from Side, Preventing Damage to Wires
#adMore information #ad
It’s very handy. This quality tool can save your knuckles and time！. The socket is slotted so that you can remove the oxygen sensor while still connected to the wiring harness, and the socket is offset and compact, providing additional leverage even in hard-to-reach spots. Use with any 3/8 inch drive ratchet or breaker bar. Common 6 point, 7/8 in 22mm socket, suitable for most oxygen sensors.| Brand | YCT #ad |
| Manufacturer | YCT AUTO #ad |
| Part Number | YCT02059 |
| Model | YCT02059 |
More information #ad
5. A ABIGAIL
#ad29mm fits All Vehicle O2 Removal and Installation Universal Puller and Removal Tool, 7PCS Oxygen Sensor Socket 22mm 7/8 in, 27mm
#adThis high quality tool can save your time! Service100% satisfaction guarantee, simply contact customer service for troubleshooting help, parts, if you have any issues with the oxygen sensor socket, replacement, or refund.
More information #ad
Use built for use with 3/8” ratchets, and breakers bars to remove and install oxygen sensors and hex vacuum switches on vehicle, 1” wrenches, even if you don't have a lot of experience working with cars. Designstandard 6 point with low profile and 8mm x 64mm side cutout design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots. Our aim is to make you satisfy the parts and the service we provide for you. Size 7mm slot, 7/8” 22mm x 6-point x 3-1/10” 80mm length, 3/8 inch square drive for use with ratchet.
| Brand | A ABIGAIL #ad |
| Manufacturer | A ABIGAIL #ad |
| Part Number | A7723F |
More information #ad
6. TEKTON
#adTEKTON 3/8 Inch Drive x 7/8 Inch 6-Point Oxygen Sensor Socket | 4929
#adMore information #ad
Drive ratchet or breaker bar. Common 6 point, 7/8 in. Use with any 3/8 in. Constructed from drop forged, heat treated, chrome vanadium steel.| Brand | TEKTON #ad |
| Manufacturer | TEKTON #ad |
| Height | 2 Inches |
| Length | 5.75 Inches |
| Weight | 0.55 Pounds |
| Width | 1.75 Inches |
| Part Number | 4929 |
| Model | 4929 |
| Warranty | Always Guaranteed: [email protected] |
More information #ad
7. A ABIGAIL
#adOxygen Sensor Socket with Side Wire Cutout 3/8” Inch Drive x 7/8” 22mm fits All Vehicle O2 Removal and Installation Offset Oxygen Sensor Socket
#ad3/8 inch square drive for use with ratchet.
More information #ad
This high quality tool can save your time! service 100% satisfaction guarantee, replacement, simply contact customer service for troubleshooting help, if you have any issues with the oxygen sensor socket, parts, or refund. Our aim is to make you satisfy the parts and the service we provide for you. Size 7/8 inch 22 millimeter hex fits almost all oxygen sensors. Use built for use with ratchets and breakers bars to remove and install oxygen sensors and hex vacuum switches on vehicle, even if you don't have a lot of experience working with cars.
| Brand | A ABIGAIL #ad |
| Manufacturer | A ABIGAIL #ad |
| Part Number | A7723F-FBA |
| Model | A7723F-FBA |
More information #ad
8. ITEQ
#adITEQ 5 Pcs Automotive Oxygen Sensor Socket Wrench Remover Tool and Thread Chaser Set
#adOffset crowfoot socket wrench 1-15/16” long, 1-pc 3/8” Dr. Low-profile crowfoot socket wrench 1-1/4” long, 1-pc M18 x 1. 5mm and 1-pc M12 x 1. 25mm thread chasers with 3/8” drive to clean and repair damaged threads.
More information #ad
Perfect tool set for removing, inspecting, replacing and installing heated and non heated oxygen sensors and vacuum switches on most vehicles with computer-controlled engines. Set including: 1-pc 3/8” dr. 6-point 7/8” 22mm socket opening fits all hexagon oxygen sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar. Extra deep broach socket 3-1/8” long, 1-pc 1/2” dr.| Brand | ITEQ #ad |
| Manufacturer | ITEQ #ad |
| Weight | 1.81 Pounds |
| Part Number | IT017 |
| Model | 13 |
More information #ad
9. ARES
#adARES 70039-3/8-Inch Drive by 7/8-Inch 22mm Offset Oxygen Sensor Socket, Wire Gate Accesses Sensor from Side, Preventing Damage to Wires
#adThe sensors live in the harshest of environments and may require some elbow grease to remove, but this oxygen sensor socket can save your knuckles and save you time! Reliable | effective | efficient: users trust ares to be quality tools. This 3/8-inch drive oxygen sensor socket is also offset and compact which allows for extra leverage even in hard to reach spots.
More information #ad
If you have a pet, you realize they are more than a pet, they are part of the family. For added leverage, you can use it with your 3/8-inch breaker bar or ratchet. Aspca business ambassador: we are proud to be part of the aspca business Ambassador Program. Design: this socket's slotted design allows you to remove oxygen sensors with the wiring harness still attached. Ares offers a full line of oxygen sensor tools including our complete 70318 oxygen Sensor Socket set that features thread chasers, oxygen sensor sockets and more! Why you need it: even if you don't have a lot of experience working with cars, you can replace your O2 sensor with this tool to help with your car's emissions and gas mileage. If you have any issues with your areS Offset Oxygen Sensor Socket, replacement, simply contact customer service for troubleshooting help, parts, or refund. You are backed by our Performance Assurance Limited Lifetime Warranty.
| Brand | ARES #ad |
| Manufacturer | ARES #ad |
| Height | 1 Inches |
| Length | 5.8 Inches |
| Weight | 0.35 Pounds |
| Width | 2.71 Inches |
| Part Number | 70039 |
| Model | 70039 |
| Warranty | Performance Assurance Limited Lifetime Warranty |
More information #ad
10. Aoerzn
#adUniversal for Most Models of Cars, Wire Gate Accesses Sensor from The Side to Prevent Wire Damage, 3/8-Inch Drive, 7/8-Inch 22mm, Aoerzn Premium Offset Oxygen Sensor Socket
#adWelcome guide, high quality assurance and friendly customer service.
More information #ad
You will get: 1pcs offset oxygen sensor socket. This quality tool can save your knuckles and time！. Cooperate happily! widely applicable: common 6 point, 7/8 in 22mm socket, suitable for most oxygen sensors. I believe this product can fully meet your requirements. Use with any 3/8 inch drive ratchet or breaker bar. It’s very handy. High-quality materials: this offset oxygen sensor socket is made of premium Chrome Molybdenum steel, which enables maximum torque while being accurately cast to ensure accurate assembly and function.
| Brand | Aoerzn #ad |
| Manufacturer | Aoerzn #ad |
| Height | 1 Inches |
| Length | 2.2 Inches |
| Width | 1.2 Inches |
| Part Number | Az-osbk |
More information #ad
