As an Amazon Associate I earn from qualifying purchases.
1. Renogy #ad
Renogy Rover 40 Amp 12V/24V DC Input MPPT Solar Charge Controller Auto Parameter Adjustable LCD Display Solar Panel Regulator fit for Gel Sealed Flooded and Lithium Battery #adRenogy #ad
- Rs232 port allows the rover to communicate with the BT-1 Bluetooth module, which can pair with the Renogy DC Home smart phone app. Automatically detect 12v or 24v dc system voltages Innovative MPPT technology with high tracking efficiency up to 99% and peak Conversion efficiency of 98%.
Compatible with various deep cycle battery options: sealed, flooded, and short circuit Reverse protection: Any combination of solar module and battery, Float, gel, and Lithium Electronic protection: Overcharging, overload, Boost, without causing damage to any component 4-stage charging: Bulk, over-discharging, and Equalization and LCD screen with programmable charging parameters.
Die-cast aluminum design for heat dissipation and The capability of measuring the battery's temperature and remote monitoring Customizable charging voltages. Charges over-discharged lithium-ion batteries Error code detection for easy self diagnoses.
|Warranty||2-year material warranty|
2. Autoday-3C #ad
Vehpro MPPT 40A-100A 12V/24V Auto Focus Tracking Solar Panel Regulator Dual USB Port Charge Controller 100A #adAutoday-3C #ad
- If the voltage of battery is back to normal and the load will restart working. This mppt controller has perfect soc function, and supply power to the loads. Prevent the battery from over-charging, control charge current, over-discharging and reverse charging to solar panels during nights.
When the battery voltage is low, the controller will automatically cut off the load from the system. Any problem please contact with us, we will try our best to solve your problem and make you satisfied within 24 hours.
It is not suited for nickel metal hydride, AGM, lithium ions or other batteries. Note: the regulator is only suitable for lead acid batteries: OPEN, GEL. Mppt solar charge controller mppt10-60: compared with normal solar charge controller, this MPPT controller could increase efficiency by 10%-30%.
3. SolarEpic #ad
EPEVER MPPT Solar Charge Controller 50A Negative Ground 150V PV Solar Panel Charger with MT50 Remote Meter Temperature Sensor & PC Communication Cable #adSolarEpic #ad
- Standard modbus communication protocol with RS485 interface, to monitor or set the parameters by using the phone Apps, MT50 Meter and PC software. Lithium battery :liFePO4/ LiNiCoMnO2.
Dual rs485 port rj45 connector, it can be paralleled up to 8 units together linked by 8pin ethernet cable to make the data monitoring easy and accurate. Only solar panel and Battery Connector Available. 50ampere charging current max with big heat sink, 1875w/36v battery, max.
Pv input power: 625w/12v battery, 1250w/24V battery, 2500W/48V battery system. Negative ground 150v pv input, compatible with 12/24/36/48v batteries lead Acid Charging. Support 4 charging options: sealed, Gel, Flooded and User define, Battery temperature compensation will make the charging progress efficiently.
|Warranty||3 Years Warranty|
4. Victron Energy #ad
Victron Energy SmartSolar MPPT 75V 15 amp 12/24-Volt Solar Charge Controller Bluetooth #adVictron Energy #ad
- Smartsolar mppt 75-volt 15 amp: a solar charger gathers energy from your solar panels, and stores it in your batteries, Using the latest, fastest technology, SmartSolar maximises this energy-harvest. Incorrect installation can be hazardous, Please consult a licensed professional and follow all applicable electrical codes during installation.
It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.
The victron energy smartsolar charge controller will even recharge a severely depleted battery. Mppt solar charge controller: by constantly monitoring the voltage and current output of your solar PV panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage.
Anytime anywhere remotely control and monitor the extensive features of your SmartSolar MPPT solar charge controller with built-in Bluetooth by pairing it with your smartphone or other device via VictronConnect.
|Brand||Victron Energy #ad|
|Manufacturer||Victron Energy #ad|
5. PowMr #ad
Max 160VDC Input LCD Backlight Solar Charge for Vented Sealed Gel NiCd Lithium BatterySoftware Update VersionMPPT-60A, PowMr MPPT Charge Controller 60 amp 48V 36V 24V 12V Auto #adPowMr #ad
- Blacklight lcd dispaly pv voltage/output power/battery voltage/charging current/working mode/Temperature, TROUBLESHOOTING function and LCD display and can help users not only check the whole system operating data and statuses but also quickly identify system faults and modify parameters.
What you getour fan-favorite 24-month warranty from powmr. We consider that the larger diameter of the wire will be greater cost for customers, so we designed two connectors for each pos and negs on solar and batteries connectors.
Intelligence fan-on temperature >45℃ and off < 40℃, Porous heat dissipation. And fan use bearing technologies increase life UP TO 5000hrs in normal use. Copper wires:9AWG.
Hope you love it. Real-time energy recording. Fit for usercan be set lithium, lifepo4, linicomno2/vented/flooded/Sealed/Gel/NiCd battery. User programmable for absorption voltage/Floating voltage/Low voltage disconnect. Load Timer. Software update version100% mppt 60a solar charge controller intelligent, pv utilization ≥99%. Built-in dsp controller with high performance Automatic battery voltage detection 12V/24V/36V/48V, Max efficiency ≥98.
6. AMPINVT #ad
For AGM Sealed Gel Flooded Lithium Battery Support Wireless Control Communication, 80A Solar Panel Regulator Max Input Power 1100W-4500W, 80 Amp MPPT Solar Charge Controller 48V 36V 24V 12V Auto #adAMPINVT #ad
- Apc series mppt charge controller: 12v/24v/48v auto identifying system volt. Optional wifi box, rs-485 conmmuication Wireless Monitoring by Mobile Phone APP, available to meet various communication requirements in different situations.
The tracking rate of maximum power is ≥99% and the maximum conversion rate is >98%, household system and industrial field monitoring, e. G. Support for 4 type battery charging: lead-acid Sealed, AGM, Gel, Flooded and User Lithium Battery.
Auto control system to limit the charging power & current go over the rated value. Display the daily power generation curve and current curve. Fit for solar panel: 1140w12v;2260w24v;3420w36v;4540w48v;max input voltage:150v pv;mppt best working voltage range:DC18V-DC80V12V;DC30V-DC100V24V;DC65V-DC150V48V. Solar rv, can be widely used for various applications, etc.
7. EPEVER #ad
EPEVER 60amp MPPT Charge Controller 48V/36V/24V/12V Negative Ground Max 150V 4500W Input fit Litium/AGM/Gel/Flooded/User Backlight LCD Display Large-Amp60A-MPPT #adEPEVER #ad
- Rs-485 communication bus interface and Modbus communication protocol, available to meet various communication requirements in different situations. Max input current: 60 amp; rate input solar power: 780w12v; 1560w24v; 2340w36v; 3120w48vthe maximum input power must not exceed 1.
5 times the rated power ; max input Voltage: 150V; Auto control system to limit the charging power & current go over the rated value.
Common negative ground and troubleshOOTING function fault LED indicator. Battery temperature compensation function to ensure the controller’s life. The pv input voltage must be at least 2V greater than the battery voltage to charge. 60a mppt charge controller support for 4 type battery charging : litium, Gel, agm, lead-acid Sealed, Flooded and User user couldn’t set Lithium.
|Part Number||EPever 6415AN|
|Warranty||Manufacturer warranty for 30days from date of purchase|
8. ALLPOWERS #ad
ALLPOWERS 20A Solar Charger Controller Solar Panel Battery Intelligent Regulator with USB Port Display 12V/24V #adALLPOWERS #ad
- Mutiple electric protection: Over-current and short-circuit protection, inverse connection protection, low voltage and overcharge protection. Adjustable power rate with dual usb ports; 3-StageBulk, ABS, Float charge management and 4-Stage PWM charge.
Good heat dissipation: dual mosfet reverse current protection, low heat productionALL electronic components generate heat when they are running, it is better to shelter them for better heat dissipation, avoid direct sunlight exposure or damp place.
Functionality: equipped with industrial-grade STM 8 microprocessor to control the charger and discharge process and it has reliable battery to charge and discharge period management.
Please notice the controller might be power off if the battery voltage is too low. Rated discharge current: 20a; usb output voltage: 5v/3a; battery voltage: 12v/24v auto. Easy to use: comes with a display that can clearly indicate the status and data, industrial, suitable for home, it can be conveniently switched modes and parameter configuration, commercial etc.
9. ATEM POWER #ad
Gel, LiON Batteries, Calcium, AGM, Multiple Protection Design, ATEM POWER 12V 20A DC to DC Battery Charger with MPPT Solar Panel Controller for Lead Acid #adATEM POWER #ad
- Convenient & versatility: it is ideal for campervans, commercial vehicles and boats, 4WDs, caravans, RVs, campers, trucks, trailers, and the LED indicator shows real-time charging stage and memory function makes your charging more convenient.
Optimized performance: besides effectively pulling power from solar panel or vehicle’s alternator to charge your auxiliary battery, pre-charge, this charger has incorporated a built-in MPPT that can increase solar panel’s efficiency by up to 30%! Efficient charging: this charger integrates standby, full charge and re-charge stages, constant voltage charging, constant current charging, and upgraded algorithm selects the optimum mode and revives your discharged battery.
Re-selection ready: this atem power dc to dc charger, lion batteries, Gel, compatible with lead Acid, AGM, calcium, allows you to re-select the battery during charging by long pressing “POWER”. Solid protection: over-chargeleave your device connected indefinitely, over-temperature, input/output reverse polarity protection are incorporated, short circuit, solar input overload, thermal load, as well as quality wires and aluminum housing.
|Brand||ATEM POWER #ad|
|Manufacturer||ATEM POWER #ad|
10. SolarEpic #ad
EPEVER 40A MPPT Solar Charge Controller 100V Input Tracer 4210AN with Display Negative Ground Lithium Battery Charger Work with LiFePO4 #adSolarEpic #ad
- Die-cast aluminum design and nature cooling. Multiple load control modes: manual control, light ON/OFF, light On+Timer and test mode. Four battery type options:Sealed, Flooded, Gel, and USER define.
Compatible with 12v or 24V battery system. Epever tracer 4210an series negative Ground and compatible with LithiumLiFePO4 Battery Charging. High tracking efficiency up to 99%.
|Warranty||2 years warranty by solarepic from the date of purchase.|