Top 10 Idler Arm and PITMAN Arm – Automotive Replacement Steering System Equipment

As an Amazon Associate I earn from qualifying purchases.

1. Parts Warehouse

#ad

PartsW 3 Piece Steering Kit Idler Arm Pitman Arm With 4 Grooves Idler Arm Bracket Assembly for Cadillac Chevrolet and GMC

#ad
Parts Warehouse #ad - Important note: only models w/ Power Steering Gear Box and Pitman Arm With 4 Grooves. Dust boot is re-installed and permanently attached to reduce contamination, and increase durability and service life. Advanced corrosion protection against the harshest conditions / Precision-made performance and additional strength. Greaseable design where applicable, for easy maintenance and longevity. Undergo impact, wear, and fatigue testing to help ensure quality and durability.
BrandParts Warehouse #ad
ManufacturerPartsW #ad
Weight13 Pounds
Part NumberPW0687P

2. Parts Warehouse

#ad

Pitman Arm 4 Grooves and Idler Arm Bracket Assembly 4WD Only, PartsW 3 Piece Front Steering Kit Idler Arm

#ad
Parts Warehouse #ad - Important note: pitman arm witH 4 GROOVES. Advanced corrosion protection against the harshest conditions / Precision-made performance and additional strength. Greaseable design where applicable, for easy maintenance and longevity. Undergo impact, wear, and fatigue testing to help ensure quality and durability. Dust boot is re-installed and permanently attached to reduce contamination, and increase durability and service life.
BrandParts Warehouse #ad
ManufacturerParts W #ad
Weight7 Pounds
Part NumberPW0687

3. DLZ

#ad

DLZ 3 Pcs Suspension Kit-1 Idler Arm 1 Idler Bracket 1 Pitman Arm Compatible with Chevrolet GMC C1500 K1500 1993-1999, Chevrolet GMC C2500 C3500 K2500 K3500 1993-2000, Chevrolet Tahoe 1995-1999

#ad
DLZ #ad - Only compatibility with: 1993 1994 1995 1996 1997 1998 1999 gmc k1500; 1993 1994 1995 1996 1997 1998 1999 gmc k1500 suburban; 1993 1994 1995 1996 1997 1998 1999 2000 gmc k2500; 1993 1994 1995 1996 1997 1998 1999 gmc k2500 suburban; 1993 1994 1995 1996 1997 1998 1999 2000 gmc k3500; 1993 1994 1995 1996 1997 1998 1999 GMC Yukon. Please make sure to match the exact part numbers between this part and the part that you are replacing.

Only compatible with: 1993 1994 1995 1996 1997 1998 1999 2000 chevrolet k2500; 1993 1994 1995 1996 1997 1998 1999 chevrolet k2500 suburban ; 1993 1994 1995 1996 1997 1998 1999 2000 chevrolet k3500; 1995 1996 1997 1998 1999 chevrolet tahoe; 1993 1994 1995 1996 1997 1998 1999 gmc c1500 ; 1993 1994 1995 1996 1997 1998 1999 gmc c1500 suburban ; 1993 1994 1995 1996 1997 1998 1999 2000 gmc c2500 1993 1994 1995 1996 1997 1998 1999 GMC C2500 Suburban; 1993 1994 1995 1996 1997 1998 1999 2000 GMC C3500 Important notice !!!: before placing the order, please check your car model in the amazon Fitment Filter System in the top left corner. Contact your mechanics, or send us a message to make sure it matches exactly in case of doubt before purchasing.

Only compatible with: 1999 2000 cadillac escalade; 1993 1994 chevrolet blazer; 1993 1994 1995 1996 1997 1998 1999 chevrolet c1500; 1993 1994 1995 1996 1997 1998 1999 chevrolet c1500 suburban; 1993 1994 1995 1996 1997 1998 1999 2000 chevrolet c2500; 1993 1994 1995 1996 1997 1998 1999 chevrolet c2500 suburban; 1993 1994 1995 1996 1997 1998 1999 2000 chevrolet C3500; 1993 1994 1995 1996 1997 1998 1999 Chevrolet K1500; 1993 1994 1995 1996 1997 1998 1999 Chevrolet K1500 Suburban. Interchange part number: 26028523, k6335; package include: 1 idler arm, 7849562, 26051896, 26028525, k6447; K6722; 26032996, 1 idler bracket, 26059030, 1 Pitman Arm. Compatibility information provided is for reference only.
BrandDLZ #ad
ManufacturerPartsgoing #ad
Weight10.6 Pounds
Part NumberGPCM-0658185616

4. Detroit Axle

#ad

Detroit Axle 13pc Front End Suspension Kit Upper Control Arm Lower Ball joints Inner outer Tie rods Sway bar links 4Groove Pitman Idler arm assembly for Chevy Silverado GMC Sierra 1500 4WD

#ad
Detroit Axle #ad - Highest quality - 10 Year Warranty - Same Day Shipping. Both 2 front ider arm + front idler arm Bracket Assembly Both 2 Front Stablizer Sway Bar End Links. For - 2002-2006 cadillac escalade - 2001-2007 chevrolet avalance 1500 - 1999-2000 silverado 1500 - 2001-2006 silverado 1500 4wd standard & extended cab - 2000-2006 suburban 1500 - 2000 tahoe - 2001-2006 tahoe - 1999-2000 gmc sierra 1500 - 2001-2006 gmc sierra 1500 4wd Standard & Extended Cab - 2007 GMC Sierra 1500 Classic 4WD Standard & extended cab - 2007 silverado 1500 classic 4wd standard & Extended Cab - 2000-2006 GMC Yukon - 2000-2006 GMC Yukon XL 1500.

44-groove steering pitman arm please verify you have a 4 groove Pitman Arm 4WD 4X4 6-LUG ONLY. For 1999 2000 2001 2002 2003 2004 2005 2006 2007 chevy silverado GMC Sierra 1500 4x4.
BrandDetroit Axle #ad
ManufacturerDetroit Axle #ad
Height15 Inches
Length25 Inches
Weight37 Pounds
Width14 Inches
Part Number80017-13-DA

5. Detroit Axle

#ad

Both 2 Idler Arm & Idler Arm Bracket Assembly, New Complete 7-Piece Front Steering Suspension Kit for Chevy & GMC Trucks 10-Year Warranty- All 4 Inner & Outer Tie Rod, 4-Groove Pitman Arm

#ad
Detroit Axle #ad - Both 2 front ider arm + Front Idler Arm Bracket Assembly. Manufactured in ISO9002 Certified facility. Both 2 front inner tie rod Ends + 4-Groove Pitman Arm. Highest quality - 10 Year Warranty - Same Day Shipping. For silverado & Sierra 4x4 Models Only.
BrandDetroit Axle #ad
ManufacturerDetroit Axle #ad
Height10 Inches
Length10 Inches
Weight14 Pounds
Width7 Inches
Part Number80017-7-DA

6. Detroit Axle

#ad

Detroit Axle, New 3pc Suspension Steering Kit, Front Steering Idler Arm + Front IdlerArm Bracket Assembly + 3-Groove Pitman Arm for Chevy & GMC Trucks -10-Year Warranty

#ad
Detroit Axle #ad - Detroit axle is a leading supplier of ride control products to OE vehicle manufacturers Nationwide, that expertise translates to Detroit Axle's OE-quality Aftermarket. 3-groove Pitman Arm. Manufactured in ISO9002 Certified facility. Front steering Pitman Arm. Idler arm Bracket Assembly.
BrandDetroit Axle #ad
ManufacturerDetroit Axle #ad
Height8.5 Inches
Length11 Inches
Weight8 Pounds
Width5.5 Inches
Part Number80090-3

7. MOOG Chassis Products

#ad

MOOG Chassis Products K6335 PITMAN ARM

#ad
MOOG Chassis Products #ad - Loose or worn chassis parts can lead to premature tire wear. Use on vehicles with power steering. Fits 1988 - 1995 gM trucks. Made of steel with natural finish. Premium heavy duty gauge steel construction for strength and durability. Greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear. Stock ride height. Easy to install. Greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear.
BrandMOOG Chassis Products #ad
ManufacturerFederal Mogul #ad
Height1.5 Inches
Length2.7 Inches
Weight2.9 Pounds
Width1.9 Inches
Part NumberK6335
ModelK6335
WarrantyLimited Warranty

8. MOOG Chassis Products

#ad

Moog K6723 Idler Arm Bracket

#ad
MOOG Chassis Products #ad - Premium polychloroprene sealed boot includes grease relief valve to keep contaminants out. Service no longer requires removal of the skid plate. Routine service is easy, as the zerk is now accessible through the wheel well.

Problem solver powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability. Problem solver design includes an exclusive grease fitting extension hose that relocates the idler arm grease fitting to the sway bar frame bracket. Problem solver patented cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life part. One piece housing is forged from premium material and heat treated for strength and durability.
BrandMOOG Chassis Products #ad
ManufacturerFederal Mogul #ad
Height2.7 Inches
Length9.8 Inches
Weight4.37 Pounds
Width4.5 Inches
Part NumberK6723
ModelK6723

9. ACDelco

#ad

ACDelco 46C1112A Advantage Idler Link Arm

#ad
ACDelco #ad - Precision-machined arm, housing, and socket end for better fit and performance. Greaseable design where applicable for easy maintenance and longevity. Coated for corrosion resistance and long life. Dust boot is re-installed and permanently attached to reduce contamination and increase durability and service life. Undergo impact, wear, and fatigue testing to help ensure quality and durability.
BrandACDelco #ad
ManufacturerACDelco #ad
Height2.9 Inches
Length11.6 Inches
Weight4.4 Pounds
Width8.5 Inches
Part Number46C1112A
Model46C1112A
Warranty12 Month / Unlimited Mile Limited Warranty on parts sold on or after 04/01/18. (Parts Only) Please see ACDelco.com for more details.

10. MOOG

#ad

MOOG K6535HD Steering Idler Arm

#ad
MOOG #ad - Needle bearings provide size consistency and proper hardness for even load distribution. Snap rings are held to strict tolerances to ensure proper cup position and retention. Includes an exclusive anti-drainback design to control lubrication flow and prevent dry start up.

Seals utilize stringent multifaceted SAE performance standards to ensure consistently high quality. Thrust washers are manufactured to tight tolerances to allow for easier driveshaft balancing. Needle bearings and snap rings are sourced from an original equipment supplier. Patented thrust washer technology absorbs axial loads preventing metal to metal contact and ensures even grease distribution to the wear surfaces.

Nitrile rubber grease seals use a compressed double lip design to ensure more effective protection from contaminants and are purgable for longer life. Greaseable u-joint allows for new grease to flush out contamination and moisture reducing corrosion and wear.
BrandMOOG #ad
ManufacturerFederal Mogul #ad
Height2.63 Inches
Length9.75 Inches
Weight3.18 Pounds
Width4.5 Inches
Part NumberK6535HD
ModelK6535HD
WarrantyLimited Warranty