As an Amazon Associate I earn from qualifying purchases.
Medoon #ad - Working temperature range: -76℉ to 446℉ -60℃ to 230℃. The material of union adapter is lightweight aluminum. Maximum working pressure: 3000psi. Professional installation is highly recommended. Service: 6an ptfe hose relatively hard, please contact with us, it can't be bend and folding in half.
Mostly used in efi ls system and used as fuel injection hose, ls engine swap, transmission oil cooler line, vapor return line, carb fuel line, turbo oil feed and boost line, etc.
Effectively: ptfe fuel line can be compatible with all automotive fuels/lubricants/coolant. Outside diameter: 0465". Better kits: 20ft an6 fuel line + 12pcs ptfe hose end fitting + 4pcs quick Disconnect Fitting + 6pcs Hose Separator Clamp + 2pcs 6AN Male Coupler + 1pcs Way Reaming Tool.
Piodelo #ad - Bursting pressure : 3MPA. Excellent stability: the 3/8 fuel hose made of premium quality nbr Rubber; The hose end AN fittings is made of high strength Aluminum, polished and anodized surface provide the bright appearance, corrosion protection and strong strength. Why choose us: excellent workmanship and strict inspection before leaving the factory are necessary conditions for product reliability, stability and long-term use.
Fule hose inner diameter:3/8 inch, outside diameter: 5/8inch. Please measure before purchase. Not recommend E85. Used this on a ls swap, hydraulic fluid, diesel, make it easier for the plumbing of fuel system.
5-290 psi. All products have been tested on the machine before leaving the factory. Excellently Sealed, no leaking. Mostly used in ls and EfI system, can be worked with petrol, oil, fuel. Fuel hose kit includes fuel tube and aluminum alloy fitting adapter: 1pc 25ft 6an nbr fuel line, 2pcs 6an to 1/4"NPT hose adapter fitting, 2pcs 6AN to 3/8" hose adapter fitting, 1pc 6an to 3/8" quick disconnect male, 6pcs 6AN straight hose end, 2pcs 6AN 45 Degree hose end, 1pc 6AN to 5/16" hose adapter fitting.
EVIL ENERGY #ad - Application: sae 30r7 rubber fuel line widely used in fuel system, steam emission, oil cooling, please check the pressure of application before perchase. Temperature range: -40°F to 257°F. Minimum Bend Radius: 3. 9inch100mm. Applicable medium: 3/8 id fuel line can work with diesel/biodiesel/gasoline/Oil/grease/water and air, etc.
Tektall #ad - Bursting pressurepsi : 10000psi. Safety features please check the working pressure and temperature before purchase. Fuel hose working temperature: -22℉ to 248℉ -30℃ to 120℃ Maximum Working Pressurepsi : 3000psi. Swivel hose ends are made from T6061 Aluminum, with excellent flexibility, anodized finish for high strength, good durability and anti-corrosion.
Easily to use the fuel injection hose and an6 fittings are easily run all the way from your fuel tank to the engine. Durable material the 6an fuel line is made of cpe synthetic rubber, covering with high quality braided Nylon and 304 Stainless Steel weir mesh sleeve, flame retardancy and corrosion resistance.
Mostly used in ls swap or conversions but can also be used with petrol, hydraulic fluid, diesel, coolant, E85 hose, pump gas, alcohol, oil, fuel. Professional installation is highly recommended. Noteptfe hose relatively hard, it can't be bend and folding in half.
IPARTS EXPERT #ad - Professional Installer is Highly Recommended. Hose material: covered with high quality woven nylon and stainless Steel Braided + CPE Synthetic Rubber to enhance flexibility and give a cool racing appearance; The fitting is made of T6061 Aluminum, anodized finish for high strength and good durability.
Recommended for alcohol, nitro, clutch hose, fuel hose, oiling, transmission, clutch, power steerig, hydraulic and vacouum applications. Exchange or return for free if leak.
Safety features for your protection: fuel hose: sizeid: 6an, working temperature: -100℉ to 500℉ -73°C to + 260°C, Length: 20FT, Pressure Tolerance: 500 PSI, the fuel line has good flame retardancy and excellent corrosion resistance. Universal application: the fuel line hose fits different brands of different cars. Nylon braided cpe fuel line: best for oil gas line, turbo line.
EVIL ENERGY #ad - Ptfe fuel hose can be compatible with all automotive fuels, lubricants, and coolant. Maximum working pressure: 3000 psi. Ptfe nylon braided fuel line kit mostly used in efi ls system and can be used as fuel injection hose, fuel return line, turbo oil feed and boost line, vapor return line, ls engine swap and EFI conversion fuel line, vacuum line, fuel supply line, transmission oil cooler line, carb fuel line, turbocharger fuel line and other high temperature high pressure applications.
Ptfe hose relatively hard, it can't be bend and folding in half. An-6 nylon braided high pressure PTFE fuel line holds up a lot stronger to heat and extreme circumstances. Please measure before purchase!Includes: as shown in the picture. Outside diameter: 0465inch. Bursting pressure: 10000psi. Inner diameter: 5/16".
SINTLY #ad - Hose od: 0465inch. Hose id: 5/16". Application ptfe e85 nylon braided 6an fuel line mostly used in EFI LS system and worked with transmission fluid, coolant, oil, diesel, pump gas, and fuel. Bursting pressurepsi: 10000psi.
The size of 6an fuel line kit ptfe if you are installing this product for the first time, it is highly recommended to have it installed by a professional. Working temperature range: -76℉ to 446℉-60℃ to 230PTFE℃.
Including 6an ptfe hose ends6pcs 6an ptfe straight hose end, 2pcs 6an to 3/8" hose adapter fitting, ，1 x gloves, 1pc 6an to 5/16" hose adapter fitting, 1 pc AN6 to 3/8"quick disconnect male.2pcs 6an to 1/4"npt hose adapter fitting, 2pcs 6an ptfe 45 degree hose end, 1 x wrench and 6AN PTFE Black Nylon Braided fuel line Length: 25 Feet. Warranty sintly offers a 3-month warranty for the 6AN fuel line kits.
Shineyoo #ad - It is maintenance free and precision designed for extended service life. Wide application:nylon stainless steel braided rubber nylon braided fuel line kits are primarily used in EFI LS systems as fuel injection hoses, vacuum lines, transmission oil cooler lines, fuel supply lines, turbine oil feed and boost lines, steam return lines, fuel return lines, LS engine exchange and EFI conversion fuel lines, hydrocarbon fuel lines, turbocharger fuel lines and other high temperature and high pressure applications.
Hose id: 034". If you have any questions, we will do our best to serve you.
Operating temperature range: -104°f to 300°f -40°c to 148. 9°c maximum working pressure: 500 psi. Package includes: 10pcs 6an swivel hose ends 4pcs straight, 2pcs 45degree, 2pcs 180degree, 2pcs 6AN Hose adapter fitting, 1pcs way reaming tool, 1pcs quick disconnect male, 2pcs 90degree, 6pcs 6ANn hose separator clamp and 6AN braided fuel line Length: 26 Feet. Burst pressure: 2000psi.
WnSEu #ad - 1pc 6an to 3/8" male straight filter fittings+1Pc 6AN to 5/16" Fuel Filter Return Line Fitting. 1pc 6an 25 feet of high-pressure fuel injection hose. 2pcs 6an to 3/8" fuel filter feed line fittings+2pcs -6an to 1/4" npt fuel Pump Adapters+2Pcs 45 Degree -6AN Female to 3/8" Push Lock hose fittings.
1. Medoon
#adLS Swap EFI E85 Injection Fuel Hose Fitting 20FT, 5/16" Nylon Stainless Steel Braided, Medoon 6AN PTFE Fuel Line Kit
#adMostly used in efi ls system and used as fuel injection hose, ls engine swap, transmission oil cooler line, vapor return line, carb fuel line, turbo oil feed and boost line, etc.
More information #ad
Specifications: inner diameter: 5/16". Bursting pressure: 10000psi. If you have any questions, we are in 24 hours service! Material: the 6an fuel line kits made of more corrosion-resistant nylon Stainless Steel Braided + PTFE Synthetic Rubber; The fitting made of T6061 Aluminum. Effectively: ptfe fuel line can be compatible with all automotive fuels/lubricants/coolant. Outside diameter: 0465". Better kits: 20ft an6 fuel line + 12pcs ptfe hose end fitting + 4pcs quick Disconnect Fitting + 6pcs Hose Separator Clamp + 2pcs 6AN Male Coupler + 1pcs Way Reaming Tool.
| Brand | Medoon #ad |
| Manufacturer | Medoon #ad |
| Part Number | MD6M6ANPTFETZ |
More information #ad
2. Piodelo
#adPiodelo 6AN 3/8" LS Swap EFI Fuel Line Fitting Kit, EFI LS Fuel Injection Line NBR Rubber Fuel Hose 25FT with 14 pcs AN6 Swivel Fuel Hose Fitting Adapter Kit
#adFule hose inner diameter:3/8 inch, outside diameter: 5/8inch. Please measure before purchase. Not recommend E85. Used this on a ls swap, hydraulic fluid, diesel, make it easier for the plumbing of fuel system.
More information #ad
Function: the fuel injection hose are easily enough here to run all the way from your fuel tank to the engine. Professional installation is highly recommended. Safety features: the rubber fuel transfer hose working pressure psi: 217. 5-290 psi. All products have been tested on the machine before leaving the factory. Excellently Sealed, no leaking. Mostly used in ls and EfI system, can be worked with petrol, oil, fuel. Fuel hose kit includes fuel tube and aluminum alloy fitting adapter: 1pc 25ft 6an nbr fuel line, 2pcs 6an to 1/4"NPT hose adapter fitting, 2pcs 6AN to 3/8" hose adapter fitting, 1pc 6an to 3/8" quick disconnect male, 6pcs 6AN straight hose end, 2pcs 6AN 45 Degree hose end, 1pc 6AN to 5/16" hose adapter fitting.
| Brand | Piodelo #ad |
| Manufacturer | Piodelo #ad |
More information #ad
3. EVIL ENERGY
#adEVIL ENERGY 3/8 Fuel Hose Line NBR Rubber 30R7 10FT 300PSI
#adMore information #ad
Burst pressure: 1160psi. Working pressure: 300psi. Id: 3/8inch 10mm, od: 2/3inch17mm. Material: NBR. Evil energy provide 10ft 3/8inch fuel hose 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message.| Brand | EVIL ENERGY #ad |
| Manufacturer | Speedwow Tuning #ad |
| Part Number | EV01394BK |
More information #ad
4. Tektall
#adTektall 25FT PTFE Fuel line Kit,6AN 3/8" Fuel Hose EFI LS Fuel Injection line E85 Oil Gas Hose Fitting Kit Nylon Stainless Steel Braided
#adEasily to use the fuel injection hose and an6 fittings are easily run all the way from your fuel tank to the engine. Durable material the 6an fuel line is made of cpe synthetic rubber, covering with high quality braided Nylon and 304 Stainless Steel weir mesh sleeve, flame retardancy and corrosion resistance.
More information #ad
All in one package includes 1pc -6 an 25feet/7. 5meters high-pressure fuel injection hose; 1pc -6 an to 3/8" male straight filter fitting; 1pc -6 an to 5/16" fuel filter return line fitting; 2pcs -6 AN to 3/8" Fuel Filter Feed Line Fittings; 2Pcs -6 AN to 1/4" NPT Fuel Pump Adapters; 2Pcs 45 Degrees -6 AN Reusable Push Lock Hose Fitting Adapter; 6Pcs Straight/0 Degree -6 AN Reusable Push Lock Hose Fitting Adapter. Mostly used in ls swap or conversions but can also be used with petrol, hydraulic fluid, diesel, coolant, E85 hose, pump gas, alcohol, oil, fuel. Professional installation is highly recommended. Noteptfe hose relatively hard, it can't be bend and folding in half.
| Brand | Tektall #ad |
| Manufacturer | Tektall #ad |
More information #ad
5. IPARTS EXPERT
#adBlack, 3/8 6AN 20FT Fuel Line Hose Kit, Nylon Stainless Steel Braided Fuel Line Oil/Gas/Fuel Hose End Fitting Hose with 10PCS Swivel Fuel Hose Fitting Adapter Kit
#adRecommended for alcohol, nitro, clutch hose, fuel hose, oiling, transmission, clutch, power steerig, hydraulic and vacouum applications. Exchange or return for free if leak.
More information #ad
Such as automobiles or marine engines, most suitable for racing cars & motor racing bikes. Package includes: 1 x 6an 20ft nylon braided hose, 2 x 45 degree swivel Hose Ends, 2 x 90 Degree Swivel Hose Ends, 4 x straight swivel hose ends, 2 x 180 Degree Swivel Hose Ends. Safety features for your protection: fuel hose: sizeid: 6an, working temperature: -100℉ to 500℉ -73°C to + 260°C, Length: 20FT, Pressure Tolerance: 500 PSI, the fuel line has good flame retardancy and excellent corrosion resistance. Universal application: the fuel line hose fits different brands of different cars. Nylon braided cpe fuel line: best for oil gas line, turbo line.
| Brand | IPARTS EXPERT #ad |
| Manufacturer | Coralov-US #ad |
| Part Number | CL005 |
More information #ad
6. EVIL ENERGY
#adE85 Nylon Braided Fuel Hose 25FT, EVIL ENERGY 6AN 3/8" PTFE LS Swap EFI Fuel Line Fitting Kit
#adMore information #ad
Working temperature range: -76℉ to 446℉ -60℃ to 230℃. Professional installation is highly recommended. Ptfe hose relatively hard, it can't be bend and folding in half. An-6 nylon braided high pressure PTFE fuel line holds up a lot stronger to heat and extreme circumstances. Please measure before purchase!Includes: as shown in the picture. Outside diameter: 0465inch. Bursting pressure: 10000psi. Inner diameter: 5/16".
| Brand | EVIL ENERGY #ad |
| Manufacturer | Speedwow Tuning #ad |
| Part Number | EV01486BK |
More information #ad
7. SINTLY
#adAN6 3/8" PTFE LS Swap EFI E85 Nylon Braided Fuel Line with PTFE Fuel Hose Fitting Adapter Kit Black, SINTLY 6AN 25FT PTFE Fuel Line Hose Kit
#adThe size of 6an fuel line kit ptfe if you are installing this product for the first time, it is highly recommended to have it installed by a professional. Working temperature range: -76℉ to 446℉-60℃ to 230PTFE℃.
More information #ad
Please confirm the size before purchasing! Working parameter of 6an ptfe fuel line maximum working pressure psi: 3000 psi. Please feel free to contact us via Amazon message. Including 6an ptfe hose ends6pcs 6an ptfe straight hose end, 2pcs 6an to 3/8" hose adapter fitting, ，1 x gloves, 1pc 6an to 5/16" hose adapter fitting, 1 pc AN6 to 3/8"quick disconnect male.2pcs 6an to 1/4"npt hose adapter fitting, 2pcs 6an ptfe 45 degree hose end, 1 x wrench and 6AN PTFE Black Nylon Braided fuel line Length: 25 Feet. Warranty sintly offers a 3-month warranty for the 6AN fuel line kits.
| Brand | SINTLY #ad |
| Manufacturer | SINTLY #ad |
More information #ad
8. Shineyoo
#adShineyoo 6AN Nylon Stainless Steel Braided Rubber EFI LS Fuel Injection line Fitting Kit Stainless Steel Braided 26FT 3/8"
#adHose id: 034". If you have any questions, we will do our best to serve you.
More information #ad
Hose od: 0543inch. Premium material:nylon stainless steel braided rubber nylon braided fuel line has excellent corrosion resistance and AN fittings are black anodized to provide corrosion protection and great strength. Best service:if you have any questions about our 6an nylon stainless steel Braided Rubber EFI LS Fuel Injection line Fitting Kit, please contact us in time, we will provide you with a refund service. Operating temperature range: -104°f to 300°f -40°c to 148. 9°c maximum working pressure: 500 psi. Package includes: 10pcs 6an swivel hose ends 4pcs straight, 2pcs 45degree, 2pcs 180degree, 2pcs 6AN Hose adapter fitting, 1pcs way reaming tool, 1pcs quick disconnect male, 2pcs 90degree, 6pcs 6ANn hose separator clamp and 6AN braided fuel line Length: 26 Feet. Burst pressure: 2000psi.
| Brand | Shineyoo #ad |
| Manufacturer | Shineyoo #ad |
More information #ad
9. Gates
#adGates 27349 Barricade Fuel Injection Hose-15' Length, Inner Diameter 3/8"
#adGates #ad - Oil, ozone, heat, and abrasion-resistant cover. Extremely low permeation rate. Multi-fuel compatibility. Hnbr tube with thermoplastic barrier, aramid fiber reinforcement and CPE cover. Meets sae 30r14 t2 except for kink resistance, CARB and EPA non-road fuel lines.More information #ad
| Brand | Gates #ad |
| Manufacturer | Gates #ad |
| Height | 0 Inches |
| Length | 0 Inches |
| Weight | 1.03 Pounds |
| Width | 0 Inches |
| Part Number | 27349 |
| Model | 27349 |
| Warranty | Please contact retailer/seller for assistance |
More information #ad
10. WnSEu
#adMSCRP Fuel Injection Line Fitting Adapter Kit EFI FI w/Filter/Regulator LS Conversion
#adMore information #ad
6pcs straight -6an female to 3/8" Push Lock hose fittings. 1pc ls fuel filter/58psi regulator.| Brand | WnSEu #ad |
| Manufacturer | Ruian Mu Sen Auto Parts Co., Ltd. #ad |
| Part Number | YX02055 |
More information #ad
