Top 10 Delphi Ignition coil – Automotive Replacement Ignition Coil Packs

As an Amazon Associate I earn from qualifying purchases.

1. Delphi

#ad

DELPHI GN10164 Ignition Coil for Ford 4.6L 5.4L V8 DG457 DG472 EXPLORER CROWN VICTORIA EXPEDITION F-150 F-250 MUSTANG LINCOLN EXPLORER DG508 3W7Z12029AA GN10164-111B set of 8

#ad
Delphi #ad - Epoxy vacuum techniques reduce air bubbles in the epoxy, because having fewer air bubbles increases the epoxy's insulation quality and reduces the chances of energy punch-through failures.

Delphi's ignition coils are engineered to Original Equipment specifications. Delphi's ignition coils are designed with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues. Delphi's coils are designed and endurance tested to resist the common stresses that cause failure. Delphi uses winding process techniques to control the length of wire between adjacent windings. That’s important because more length results in greater voltage differences, which in turn create more pressure that could break down the insulation and wire coating.
BrandDelphi #ad
ManufacturerDELPHI #ad
Height4 Inches
Length8 Inches
Weight3 Pounds
Width2 Inches
Part NumberGN10164

2. Delphi

#ad

Delphi GN10328 Ignition Coil

#ad
Delphi #ad - Delphi's coils are designed and endurance tested to resist the common stresses that cause failure. That’s important because more length results in greater voltage differences, which in turn create more pressure that could break down the insulation and wire coating.

Epoxy vacuum techniques reduce air bubbles in the epoxy, because having fewer air bubbles increases the epoxy's insulation quality and reduces the chances of energy punch-through failures. Delphi uses winding process techniques to control the length of wire between adjacent windings. Delphi's ignition coils are designed with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues. Delphi's ignition coils are engineered to Original Equipment specifications.
BrandDelphi #ad
ManufacturerDelphi #ad
Height7.5 Inches
Length3.2 Inches
Weight0.59 Pounds
Width2.5 Inches
Part NumberGN10328
ModelGN10328
Warranty

Delphi warrants the products will be free of defects in materials and workmanship. Delphi will, as its sole obligation under this limited warranty, replace any non-conforming product. Delphi is not responsible for any incidental or consequential costs (including labor) to remove and install a product or to restore the vehicle to its proper operating condition. In addition, under no circumstances will Delphi be liable for any incidental or consequential damages under this warranty or any implied warranties.

Call Delphi at: 877-463-3574

Manufacturers’ warranties may not apply in all cases, depending on factors such as use of the product, where the product was purchased, or who you purchased the product from. Please review the warranty carefully, and contact the manufacturer if you have any questions.


3. Delphi

#ad

Delphi GN10571 Pencil Ignition Coil

#ad
Delphi #ad - Delphi uses winding process techniques to control the length of wire between adjacent windings. Delphi's coils are designed and endurance tested to resist the common stresses that cause failure.

Epoxy vacuum techniques reduce air bubbles in the epoxy, because having fewer air bubbles increases the epoxy's insulation quality and reduces the chances of energy punch-through failures. Delphi's ignition coils are engineered to Original Equipment specifications. That’s important because more length results in greater voltage differences, which in turn create more pressure that could break down the insulation and wire coating. Delphi's ignition coils are designed with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues.
BrandDelphi #ad
ManufacturerDelphi #ad
Height7 Inches
Length3.1 Inches
Weight0.65 Pounds
Width3.4 Inches
Part NumberGN10571
ModelGN10571
Warranty

Delphi warrants the products will be free of defects in materials and workmanship. Delphi will, as its sole obligation under this limited warranty, replace any non-conforming product. Delphi is not responsible for any incidental or consequential costs (including labor) to remove and install a product or to restore the vehicle to its proper operating condition. In addition, under no circumstances will Delphi be liable for any incidental or consequential damages under this warranty or any implied warranties.

Call Delphi at: 877-463-3574

Manufacturers’ warranties may not apply in all cases, depending on factors such as use of the product, where the product was purchased, or who you purchased the product from. Please review the warranty carefully, and contact the manufacturer if you have any questions.


4. Delphi

#ad

Delphi GN10114 Ignition Coil

#ad
Delphi #ad - Epoxy vacuum techniques reduce air bubbles in the epoxy, because having fewer air bubbles increases the epoxy's insulation quality and reduces the chances of energy punch-through failures.

Delphi uses winding process techniques to control the length of wire between adjacent windings. That’s important because more length results in greater voltage differences, which in turn create more pressure that could break down the insulation and wire coating. Delphi's coils are designed and endurance tested to resist the common stresses that cause failure. Delphi's ignition coils are designed with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues. Delphi's ignition coils are engineered to Original Equipment specifications.
BrandDelphi #ad
ManufacturerDelphi #ad
Height6.25 Inches
Length4.5 Inches
Weight0 Pounds
Width3.5 Inches
Part NumberGN10114
ModelGN10114
Warranty

Delphi warrants the products will be free of defects in materials and workmanship. Delphi will, as its sole obligation under this limited warranty, replace any non-conforming product. Delphi is not responsible for any incidental or consequential costs (including labor) to remove and install a product or to restore the vehicle to its proper operating condition. In addition, under no circumstances will Delphi be liable for any incidental or consequential damages under this warranty or any implied warranties.

Call Delphi at: 877-463-3574

Manufacturers’ warranties may not apply in all cases, depending on factors such as use of the product, where the product was purchased, or who you purchased the product from. Please review the warranty carefully, and contact the manufacturer if you have any questions.


5. Delphi

#ad

Delphi GN10168 Ignition Coil

#ad
Delphi #ad - Delphi's ignition coils are engineered to Original Equipment specifications. Delphi uses winding process techniques to control the length of wire between adjacent windings.

That’s important because more length results in greater voltage differences, which in turn create more pressure that could break down the insulation and wire coating. Epoxy vacuum techniques reduce air bubbles in the epoxy, because having fewer air bubbles increases the epoxy's insulation quality and reduces the chances of energy punch-through failures. Delphi's ignition coils are designed with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues. Delphi's coils are designed and endurance tested to resist the common stresses that cause failure.
BrandDelphi #ad
ManufacturerDelphi #ad
Height2.8 Inches
Length3.2 Inches
Weight0.1 Pounds
Width2.5 Inches
Part NumberGN10168
ModelGN10168
Warranty

Delphi warrants the products will be free of defects in materials and workmanship. Delphi will, as its sole obligation under this limited warranty, replace any non-conforming product. Delphi is not responsible for any incidental or consequential costs (including labor) to remove and install a product or to restore the vehicle to its proper operating condition. In addition, under no circumstances will Delphi be liable for any incidental or consequential damages under this warranty or any implied warranties.

Call Delphi at: 877-463-3574

Manufacturers’ warranties may not apply in all cases, depending on factors such as use of the product, where the product was purchased, or who you purchased the product from. Please review the warranty carefully, and contact the manufacturer if you have any questions.


6. Delphi

#ad

Delphi GN10165 Ignition Coil

#ad
Delphi #ad - Delphi uses winding process techniques to control the length of wire between adjacent windings. Delphi's ignition coils are engineered to Original Equipment specifications.

That’s important because more length results in greater voltage differences, which in turn create more pressure that could break down the insulation and wire coating. Delphi's ignition coils are designed with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues. Epoxy vacuum techniques reduce air bubbles in the epoxy, because having fewer air bubbles increases the epoxy's insulation quality and reduces the chances of energy punch-through failures. Delphi's coils are designed and endurance tested to resist the common stresses that cause failure.
BrandDelphi #ad
ManufacturerDelphi #ad
Height5.5 Inches
Length4 Inches
Weight0.1 Pounds
Width3.5 Inches
Part NumberGN10165
ModelGN10165
Warranty

Delphi warrants the products will be free of defects in materials and workmanship. Delphi will, as its sole obligation under this limited warranty, replace any non-conforming product. Delphi is not responsible for any incidental or consequential costs (including labor) to remove and install a product or to restore the vehicle to its proper operating condition. In addition, under no circumstances will Delphi be liable for any incidental or consequential damages under this warranty or any implied warranties.

Call Delphi at: 877-463-3574

Manufacturers’ warranties may not apply in all cases, depending on factors such as use of the product, where the product was purchased, or who you purchased the product from. Please review the warranty carefully, and contact the manufacturer if you have any questions.


7. Delphi

#ad

Delphi GN10119 Ignition coil

#ad
Delphi #ad - That’s important because more length results in greater voltage differences, which in turn create more pressure that could break down the insulation and wire coating.

Delphi's ignition coils are designed with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues. Delphi's ignition coils are engineered to Original Equipment specifications. Epoxy vacuum techniques reduce air bubbles in the epoxy, because having fewer air bubbles increases the epoxy's insulation quality and reduces the chances of energy punch-through failures. Delphi uses winding process techniques to control the length of wire between adjacent windings. Delphi's coils are designed and endurance tested to resist the common stresses that cause failure.
BrandDelphi #ad
ManufacturerDELPHI #ad
Height4.5 Inches
Length3.25 Inches
Weight0 Pounds
Width1.88 Inches
Part NumberGN10119
ModelGN10119
Warranty

Delphi warrants the products will be free of defects in materials and workmanship. Delphi will, as its sole obligation under this limited warranty, replace any non-conforming product. Delphi is not responsible for any incidental or consequential costs (including labor) to remove and install a product or to restore the vehicle to its proper operating condition. In addition, under no circumstances will Delphi be liable for any incidental or consequential damages under this warranty or any implied warranties.

Call Delphi at: 877-463-3574

Manufacturers’ warranties may not apply in all cases, depending on factors such as use of the product, where the product was purchased, or who you purchased the product from. Please review the warranty carefully, and contact the manufacturer if you have any questions.


8. Delphi

#ad

Delphi GN10370 Pencil Ignition Coil

#ad
Delphi #ad - That’s important because more length results in greater voltage differences, which in turn create more pressure that could break down the insulation and wire coating. Delphi uses winding process techniques to control the length of wire between adjacent windings.

Epoxy vacuum techniques reduce air bubbles in the epoxy, because having fewer air bubbles increases the epoxy's insulation quality and reduces the chances of energy punch-through failures. Delphi's ignition coils are designed with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues. Delphi's ignition coils are engineered to Original Equipment specifications. Delphi's coils are designed and endurance tested to resist the common stresses that cause failure.
BrandDelphi #ad
ManufacturerDelphi #ad
Height7.56 Inches
Length2.69 Inches
Weight0.55 Pounds
Width2.69 Inches
Part NumberGN10370
ModelGN10370
Warranty

Delphi warrants the products will be free of defects in materials and workmanship. Delphi will, as its sole obligation under this limited warranty, replace any non-conforming product. Delphi is not responsible for any incidental or consequential costs (including labor) to remove and install a product or to restore the vehicle to its proper operating condition. In addition, under no circumstances will Delphi be liable for any incidental or consequential damages under this warranty or any implied warranties.

Call Delphi at: 877-463-3574

Manufacturers’ warranties may not apply in all cases, depending on factors such as use of the product, where the product was purchased, or who you purchased the product from. Please review the warranty carefully, and contact the manufacturer if you have any questions.


9. Delphi

#ad

Delphi GN10235 Plug Top Coil

#ad
Delphi #ad - Delphi uses winding process techniques to control the length of wire between adjacent windings. That’s important because more length results in greater voltage differences, which in turn create more pressure that could break down the insulation and wire coating.

Epoxy vacuum techniques reduce air bubbles in the epoxy, because having fewer air bubbles increases the epoxy's insulation quality and reduces the chances of energy punch-through failures. Delphi's coils are designed and endurance tested to resist the common stresses that cause failure. Delphi's ignition coils are designed with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues. Delphi's ignition coils are engineered to Original Equipment specifications.
BrandDelphi #ad
ManufacturerDelphi #ad
Height7.7 Inches
Length3.8 Inches
Weight0.1 Pounds
Width3.8 Inches
Part NumberGN10235
ModelGN10235
Warranty

Delphi warrants the products will be free of defects in materials and workmanship. Delphi will, as its sole obligation under this limited warranty, replace any non-conforming product. Delphi is not responsible for any incidental or consequential costs (including labor) to remove and install a product or to restore the vehicle to its proper operating condition. In addition, under no circumstances will Delphi be liable for any incidental or consequential damages under this warranty or any implied warranties.

Call Delphi at: 877-463-3574

Manufacturers’ warranties may not apply in all cases, depending on factors such as use of the product, where the product was purchased, or who you purchased the product from. Please review the warranty carefully, and contact the manufacturer if you have any questions.


10. Delphi

#ad

Delphi GN10123 Ignition coil

#ad
Delphi #ad - Delphi's ignition coils are engineered to Original Equipment specifications. Delphi uses winding process techniques to control the length of wire between adjacent windings.

Delphi's coils are designed and endurance tested to resist the common stresses that cause failure. Delphi's ignition coils are designed with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues. Epoxy vacuum techniques reduce air bubbles in the epoxy, because having fewer air bubbles increases the epoxy's insulation quality and reduces the chances of energy punch-through failures. That’s important because more length results in greater voltage differences, which in turn create more pressure that could break down the insulation and wire coating.
BrandDelphi #ad
ManufacturerDELPHI #ad
Height9 Inches
Length5 Inches
Weight1.28 Pounds
Width2 Inches
Part NumberGN10123
ModelGN10123
Warranty

Delphi warrants the products will be free of defects in materials and workmanship. Delphi will, as its sole obligation under this limited warranty, replace any non-conforming product. Delphi is not responsible for any incidental or consequential costs (including labor) to remove and install a product or to restore the vehicle to its proper operating condition. In addition, under no circumstances will Delphi be liable for any incidental or consequential damages under this warranty or any implied warranties.

Call Delphi at: 877-463-3574

Manufacturers’ warranties may not apply in all cases, depending on factors such as use of the product, where the product was purchased, or who you purchased the product from. Please review the warranty carefully, and contact the manufacturer if you have any questions.