As an Amazon Associate I earn from qualifying purchases.
THE ORIGINAL BATTERY MAT #ad - Traps and neutralizes acid. Protects your investment in equipment & Reduces Maintenance costs. Resists corrosion of battery boxes and surrounding areas. Recommended by USAF. Needle punched polypropylene dense felt, custom coated with an acid neutralizing proprietary formula.
Parameters such as the state of charge, remaining time, and much more can be monitored - the Smartshunt is the perfect alternative for systems that should need less cabling and where permanent display on a monitor, progress information, as with the BMV battery monitor, is not necessary or desired.
KanSmart #ad - One year service - the mobile audio continuous Relay comes with 1 Year Warranty | Any problem please feel free to contact us for a replacement. Feature- battery isolator solenoid is made of high-quality materials, excellent performance, and durability.
Powerful function - 12v battery isolator can continuously power handling 500 amps at 12V and handling of 700 amps at surge power | Doesn't create a voltage drop to your second battery unlike common isolators do. Eliminates battery drain - normally, eliminating that negative effect | Reducing the natural consumption of batteries after power off, when two car batteries are connected in parallel, they are easy to charge and discharge each other | The relay battery isolator stops the battery bank from getting power from each one, lengthens the life of the primary battery.
Battery disconnect relay is used to isolate the second battery which powers audio, or other equipment. 500 amp battery isolator - perfect for any application with multiple batteries that need to be isolated including Marine, visual navigation, Off-Road, Mobile Audio, Power Sports, etc. Easy to install and start up immediately. Battery isolator 500 amp with a maximum current transfer, power on demand.
CZC AUTO #ad - 4, install the cable on the stud end of the disconnect switch. Rest assured to purchase: we offer 30-day money-back for any reason, 12-month warranty for quality-related issues. Widely used for car, boat, truck, RV vehicles and electrical equipment.
Extend the life of your battery: The battery kill switch helps to disconnect battery easily to prevent it from draining down when not in use. 1, tighten the green knob. 3, make sure the negative battery post and battery clamp original battery connector clean before installation.
Much easier than taking the battery cable off each time. 5, remove the negative cable from battery. Durable&high quality: the battery cut off switch is made of zinc alloy with brass plating, corrosion resistance. Any problem in using our battery disconnect switch, please kindly contact us, your problem will be solved within 24 HOURS. Easy to install: it only takes 5 steps to install. And also you can take the knob off to prevent vehicle theft.
Huazu #ad - Easy operation: this battery isolator switch with face plate is easy to install, has on/off indicator, it has a definitive click when turning on and off. High current battery switch: rated to 200 amps continuous duty, 1000 Amps intermittent duty, used for 12-48 VDC systems to isolate and secure the electrical system.
Wide application: the huazu master battery disconnect switch is widely used for ATV, RVs, Trucks, Off-road, Heavy Vehicles, Trailers, and electrical equipment's switch.
iRhapsody #ad - Large capacity, heavy-duty make/break relay. The size of the round stud terminals: M6/6mm. Ideal for split charging or any vehicle needing a high power relay. Rated voltage: 12vdc; pickup voltage: 8v; Dropout voltage: 1.
Ampper #ad - Compatible: used for dc 12 - 24 v systems to isolate and secure the electrical system, can stand alone or be locked together with other switch.
Heavy duty: all aluminium housing, durable made for safety use. Mounts in 3/4" hole, equiped with a face plate. Copper terminal stud size: 3/8" 10 mm x 2, very easy to install, Rv and boat, vehicle, universal used for car, also electrical equipment's switch.
HMY #ad - If voltage is 48v, the Amp will reduce 25%. It will be 68. 75a dc continuous 1hr. This battery cut off kill switch widely used for car, camper, dome light. Chassis light, rv, utv and other 6v 12v 24v 48v devices but also electrical equipment's switch, fog light, ATV, such as flashing light, Boat, waterproof, Truck, dustproof, Marine, travel trailer, corrosion resistant.
We provide 1 years’ warranty for all of our products since the purchasing day and accept return/replace with any reason. Operation: on and off; rating: 275a dc continuous 1hr, 455a dc intermittent 5 min, 1250A DC Cranking 10 sec; Voltage: 6V-48V DC; Stud Size: 2x3/8" 10mm.
If the product is damaged due to shipping or installation, pls dont hesitate to contact with me, we will send you new for free. It will be 137. 5a dc Continuous 1hr. We invite customers to participate in product testing, if the test results are not suitable for your equipment, please apply for a full refund. Panel-mounted battery disconnect switches are designed specifically for panel mount applications; Countersunk recesses for surface mount application.
Renogy #ad - Various protections for ultra safety offers over-voltage Protection, Over-temperature Protection, and Reverse Polarity Protection to ensure the operation safety. Reliable qualitythe compact and robust design makes it suitable for all conditions.
Ce certification. Smart 3-stage charging the dc-dc battery charger will charge your house batteries from the starter battery by 3-stage charging Bulk, Boost, and Float, to make sure it optimally and automatically charge to 100%.
It also isolates the input and output to prevent voltage transmission errors and interfere with house battery charging. Compatible multiple battery types compatible with a multitude of alternator types, Flooded, Gel, the DC-DC battery charger offers correct charging for AGM, and Lithium batteries.
Gioyonil #ad - Fast shipping & excellent customer service; 12 Months warranty guarantee for refund or replacement of any defective one. Simple operationon/off 2 positions 0=off, 455a intermittent at dc 12v, 275a continuous at dc 12v, 1=on, 1250 A momentary at DC 12V; Voltage: 12V- 48V DC; Terminal Stud Size: 2x3/8" 10mm.
Rest-assure warrantypackage include: 1 x battery switch; 4 x mounting bolts. Wide applicationbattery isolator switch is universal used for car, Camper, Caravan, Marine Boat, ATV, Travel Trailer, RV, Battery Box, Truck, Van, UTV or or any vehicle where a battery cut-off switch is required.
Heavy duty constructionsturdy durable abs housing, rear cover insulates terminals against any short of circuits; 4 removable side plates provide access of up to 1/0 cables; Tin-plated copper studs and nuts for strong oxidation and corrosion resistance.
1. THE ORIGINAL BATTERY MAT
#adThe Original Battery Mat®, 8" x 12" Black, Battery Protective Mat
#adMore information #ad
| Brand | THE ORIGINAL BATTERY MAT #ad |
| Manufacturer | Electrolock Inc. #ad |
| Part Number | 1001548 |
More information #ad
2. Victron Energy
#adVictron Energy SmartShunt 500 amp Battery Monitor Bluetooth
#adVictron Energy #ad - Resolution and accuracy: current: ± 01a - voltage: ± 001v - state of charge 0-100%: ± 01 ah - remaining time: ± 1 min - temperature only with connected temperature sensor: ± 1 ° C / ° F 0 -50 ° C or 30 -120 ° F - Accuracy of the current measurement: ± 04% - offset: less than 20/40/80 ma - Accuracy of the Voltage measurement: ± 03%.Parameters such as the state of charge, remaining time, and much more can be monitored - the Smartshunt is the perfect alternative for systems that should need less cabling and where permanent display on a monitor, progress information, as with the BMV battery monitor, is not necessary or desired.
More information #ad
Current supply voltage range: 6. 5 - 70 vdc therefore suitable for 12v, 24v and 48v systems - current consumption: | Brand | Victron Energy #ad |
| Manufacturer | Victron Energy #ad |
| Height | 4.03 Inches |
| Length | 6.4 Inches |
| Weight | 0.88 Pounds |
| Width | 2.81 Inches |
| Part Number | SHU050150050 |
| Model | SHU050150050 |
More information #ad
3. KanSmart
#ad12v Battery Disconnect Relay 500A Relay and Isolator, 500 Amp Battery Isolator for Mobile Audio Relay Continuous Battery Isolator
#adPowerful function - 12v battery isolator can continuously power handling 500 amps at 12V and handling of 700 amps at surge power | Doesn't create a voltage drop to your second battery unlike common isolators do. Eliminates battery drain - normally, eliminating that negative effect | Reducing the natural consumption of batteries after power off, when two car batteries are connected in parallel, they are easy to charge and discharge each other | The relay battery isolator stops the battery bank from getting power from each one, lengthens the life of the primary battery.
More information #ad
Battery disconnect relay is used to isolate the second battery which powers audio, or other equipment. 500 amp battery isolator - perfect for any application with multiple batteries that need to be isolated including Marine, visual navigation, Off-Road, Mobile Audio, Power Sports, etc. Easy to install and start up immediately. Battery isolator 500 amp with a maximum current transfer, power on demand.
| Brand | KanSmart #ad |
| Manufacturer | KanSmart #ad |
| Part Number | 80000920-KI |
| Model | 80000920-KI |
More information #ad
4. CZC AUTO
#adCZC AUTO Battery Quick Disconnect Switch Top Post Switch Cut/Shut Off Switch Battery Master Isolator Switch for Boat Car Truck RV Camper Tractor Vehicles
#adExtend the life of your battery: The battery kill switch helps to disconnect battery easily to prevent it from draining down when not in use. 1, tighten the green knob. 3, make sure the negative battery post and battery clamp original battery connector clean before installation.
More information #ad
2, install the disconnect switch on the battery post. Easy to switch on and off: disconnect or connect battery by twisting the green knob a few turns. Much easier than taking the battery cable off each time. 5, remove the negative cable from battery. Durable&high quality: the battery cut off switch is made of zinc alloy with brass plating, corrosion resistance. Any problem in using our battery disconnect switch, please kindly contact us, your problem will be solved within 24 HOURS. Easy to install: it only takes 5 steps to install. And also you can take the knob off to prevent vehicle theft.
| Brand | CZC AUTO #ad |
| Manufacturer | CZC AUTO #ad |
| Part Number | 102072 |
| Model | 102072 |
More information #ad
5. Huazu
#adRV and Marine, Vehicle, 12-48V, Huazu 200A Duty Master Battery Power Cut Isolator Kill Switch with Face Plate for Car, High Current Battery Disconnect Switch
#adWide application: the huazu master battery disconnect switch is widely used for ATV, RVs, Trucks, Off-road, Heavy Vehicles, Trailers, and electrical equipment's switch.
More information #ad
Durable metal body: heavy duty metal case has strong weather resistance, protects internal components of the switch for use in the harshest conditions. When car or boat or RV is not in use, disconnects the battery safely. Safety protection: our battery disconnect switch provides power cut off to electrical system, to help prevent battery drain，safety and efficient.| Brand | Huazu #ad |
| Manufacturer | Huazu #ad |
| Height | 2.91 Inches |
| Length | 4.8 Inches |
| Width | 3.07 Inches |
| Part Number | 0779288404526 |
More information #ad
6. iRhapsody
#adIRHAPSODY 12V DC 120Amp 4 Pin Heavy Duty Split Charge Relay Switch, Continuous Duty SPST 4 Terminal Starter Relay
#adMore information #ad
2v. Our coil power is 1. 8w, and coil resistance is 80ohms. But never go beyond its capabilities, high current carrying capacity, try to stay 10 to 15% below what the rate is for. It is more reliable than 2. 4w 60 ohms and 4. 8w 30 ohms relays on the market.| Brand | iRhapsody #ad |
| Manufacturer | IRHAPSODY #ad |
| Height | 2.95 Inches |
| Length | 1.77 Inches |
| Width | 1.77 Inches |
| Part Number | AutoRelay-12V120A1P |
| Warranty | 1 YEAR |
More information #ad
7. Ampper
#adRV and Boat Aluminium Housing, Battery Power Cut Isolator Killer for Car, Ampper 12-24 V Master Battery Disconnect Switch, On/Off, Vehicle
#adHeavy duty: all aluminium housing, durable made for safety use. Mounts in 3/4" hole, equiped with a face plate. Copper terminal stud size: 3/8" 10 mm x 2, very easy to install, Rv and boat, vehicle, universal used for car, also electrical equipment's switch.
More information #ad
Purpose: eliminate any power draw from the battery when vehicle or boat is not in use, disconnects the battery safely. Operation: on/off 2 positions, 200 a continuous at DC 12V, 400 A momentary at DC 12V.| Brand | Ampper #ad |
| Manufacturer | Ampper #ad |
| Height | 2.95 Inches |
| Length | 4.4 Inches |
| Weight | 0.94 Pounds |
| Width | 2.95 Inches |
| Part Number | Am-CBS41 |
| Model | Am-CBS41 |
More information #ad
8. HMY
#adWaterproof Heavy Duty Battery Disconnect Isolator Switch Panel Mount On-Off12/50V 200/1250Amps Master Cut/Shut Off Marine Battery Switch for Boat Car RV ATV UTV Vehicle Small Yacht RV Camper…
#adWe provide 1 years’ warranty for all of our products since the purchasing day and accept return/replace with any reason. Operation: on and off; rating: 275a dc continuous 1hr, 455a dc intermittent 5 min, 1250A DC Cranking 10 sec; Voltage: 6V-48V DC; Stud Size: 2x3/8" 10mm.
More information #ad
12-60v, if voltage is 24v, 12v rated 275 amps, the amp will reduce 50%. Purpose: eliminate any power draw from the battery when vehicle or boat is not in use, disconnects the battery safely. If the product is damaged due to shipping or installation, pls dont hesitate to contact with me, we will send you new for free. It will be 137. 5a dc Continuous 1hr. We invite customers to participate in product testing, if the test results are not suitable for your equipment, please apply for a full refund. Panel-mounted battery disconnect switches are designed specifically for panel mount applications; Countersunk recesses for surface mount application.
| Brand | HMY #ad |
| Manufacturer | MDY #ad |
| Height | 2.7 Inches |
| Length | 2.6 Inches |
| Width | 2.6 Inches |
| Part Number | MDY-01076 |
| Model | MDY-01076 |
More information #ad
9. Renogy
#adGel, Commercial Vehicles, 20A, Using Multi-Stage Charging in RVs, Boats, Renogy 12V 20A DC to DC On-Board Battery Charger for Flooded, and Lithium, Yachts, AGM
#adCe certification. Smart 3-stage charging the dc-dc battery charger will charge your house batteries from the starter battery by 3-stage charging Bulk, Boost, and Float, to make sure it optimally and automatically charge to 100%.
More information #ad
Protect your starter batterythe dc-dc battery charger is capable of identifying whether the generator is started, to prevent over-discharge of the starting battery and protect the generator. It also isolates the input and output to prevent voltage transmission errors and interfere with house battery charging. Compatible multiple battery types compatible with a multitude of alternator types, Flooded, Gel, the DC-DC battery charger offers correct charging for AGM, and Lithium batteries.
| Brand | Renogy #ad |
| Manufacturer | Renogy #ad |
| Weight | 2.93 Pounds |
| Part Number | RNG-DCC1212-20 |
| Model | 12V 20A DC to DC |
| Warranty | Accessories1-year material warranty |
More information #ad
10. Gioyonil
#adBattery Disconnect Switch Master, 12V-48V Waterproof Power Isolator On-Off Kill Switch 275Amps High Current for Car RV Marine Boat Truck ATV Vehicles
#adRest-assure warrantypackage include: 1 x battery switch; 4 x mounting bolts. Wide applicationbattery isolator switch is universal used for car, Camper, Caravan, Marine Boat, ATV, Travel Trailer, RV, Battery Box, Truck, Van, UTV or or any vehicle where a battery cut-off switch is required.
More information #ad
Compatibility & benefitsused for dc 12 - 48v systems to isolate and secure the electrical system; eliminate any power draw from the battery when vehicle is not in use, disconnects the battery safely; provide a reliable way to shutdown electrical power during maintenance and protect batteries from excessive drain. Heavy duty constructionsturdy durable abs housing, rear cover insulates terminals against any short of circuits; 4 removable side plates provide access of up to 1/0 cables; Tin-plated copper studs and nuts for strong oxidation and corrosion resistance.
| Brand | Gioyonil #ad |
| Manufacturer | EurDiza #ad |
| Height | 2.2 Inches |
| Length | 2.67 Inches |
| Width | 2.67 Inches |
| Part Number | YYM04 |
More information #ad
