Top 10 Ball Joint Puller – Ball Joint & Tie Rod Tools

As an Amazon Associate I earn from qualifying purchases.

1. Orion Motor Tech

 #ad

Pitman Arm Puller, Splitter Removal Kit, Orion Motor Tech 5-in-1 Ball Joint Separator, Tie Rod End Tool Set for Front End Service

#ad
Orion Motor Tech #ad - Comes with 1x ball joint separator, 1x tie rod and ball joint remover, 1x Conical Pitman Arm Puller, 1x Pitman Arm and Tie Rod End Puller, 1x Pitman Arm Puller, 1x well-organized ABS case. Because to do perform your best, you deserve the best, that’s our Orion Motor Tech Promise.

Hardened alloy construction: extraordinarily tough and durable alloy means these tools can stand up to the toughest jobs. Conveniently keeps all your tools in one organized and secure place. Professional portable abs case: the custom-molded case is crafted from high-quality ABS hard plastic for the amateur or professional mechanic on the go. Orion motor tech promise: if any issues from our tools arise please don’t hesitate to contact us. Universally compatible with a wide range of vehicles: The versatile design allows this tool to be used as a pitman arm remover, or tie rod end puller for many small, domestic rear-wheel-drive vehicles, ball joint separator, import vehicles, and light trucks.

All in one front end service kit: containing 5 adjustable tools for a wide range of domestic and import vehicles. Never miss out on a job or project from a misplaced tool. This front end service tool kit can remove the most stubborn ball joints, tie rod ends, and pitman arms. We guarantee the quality of our tools and want to ensure you’re only getting the best.
BrandOrion Motor Tech #ad
ManufacturerOrion Motor Tech #ad
Height12.2 Inches
Length15.35 Inches
Weight10.56 Pounds
Width3.15 Inches
Part NumberOMT-PAP-10174
Model8542039067

2. GEARWRENCH

 #ad

GEARWRENCH Universal Ball Joint Separator, 3916D

#ad
GEARWRENCH #ad - Slot is 7/8" wide by 1-1/4" Deep. Adjustable for different size ball joints. For separating the ball joint from the spindle support arm on domestic and import front wheel drive vehicles. Use with a 15/16" Socket. 1-1/8" & 2-1/8" 30 & 56mm maximum opening capacity.
BrandGEARWRENCH #ad
ManufacturerCooper Tools #ad
Height2.75 Inches
Length11 Inches
Weight1 Pounds
Width5.25 Inches
Part Number3916D
Model3916D
WarrantyStandard Limited Lifetime

3. Orion Motor Tech

 #ad

Heavy Duty Ball Joint Press & U Joint Removal Tool Kit with 4x4 Adapters, for Most 2WD and 4WD Cars and Light Trucks

#ad
Orion Motor Tech #ad - Conveniently organized in custom molded case - ball joint press / bushing/ removal tool kit is enclosed inside a heavy-duty 11” x 3” x 15” inch 27. 9cm x 7. 6cm x 38. 1cm plastic blow-molded carrying case with handle for easy storage, and quick organization. If you are not satisfied with this product or if you have any question, please feel free to let us know.

Constructed from heavy-duty forged steel with black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion. Essential tool for ball joint service - use the orion motor tech ball joint press set ball joint tool / bushing Removal Tool with 4WD Adapter to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive 2WD and 4-wheel drive 4WD vehicles without removing the control arm from the vehicle. Orion motor tech - we pursue outstanding quality and professional technical support. Universally compatible with a wide range of vehicles - fit most american domestic and imported 2-wheel drive 2wd and 4-wheel drive 4WD cars and light pickup trucks that have press-fit type ball joints, Dodge, GM, include 4-wheel drive 4WD adapter that allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 30 or 44 front axle found on Ford, IHC and Jeep vehicles.

Package include: 3x receiving tube, 1x forcing-screw press, 1x Receiving Cup, 1x Installation Adapter, 1x Install Cup Adapter, safe storage, 1x Screw, 1x Removal Adapter, 1x Installing Cup. Professional grade quality and durability - off road weekend warriors, novices, and professional mechanics trust the ORION kit because ORION MOTOR TECH sources the highest quality components from around the world.
BrandOrion Motor Tech #ad
ManufacturerOrion Motor Tech #ad
Height3.54 Inches
Length13.98 Inches
Width11.91 Inches
Part NumberOMTCA BJS-0401-00
Model8542035336
Warranty2 Years Warranty, Free Replace or Full Refund

4. Orion Motor Tech

 #ad

Splitter Removal Kit, Pitman Arm Puller, Orion Motor Tech 5pc Ball Joint Separator, Tie Rod End Tool Set for Front End Service

#ad
Orion Motor Tech #ad - Professional portable abs case: the custom-molded case is crafted from high-quality ABS hard plastic for the amateur or professional mechanic on the go. Comes with 1x ball joint separator, 1x pitman arm puller, 1x pitman arm and Tie Rod End Puller, 1x Tie Rod and Ball Joint Remover, 1x Conical Pitman Arm Puller, 1x well-organized ABS case.

Because to do perform your best, you deserve the best, that’s our Orion Motor Tech Promise. Orion motor tech promise: if any issues from our tools arise please don’t hesitate to contact us. Never miss out on a job or project from a misplaced tool. We guarantee the quality of our tools and want to ensure you’re only getting the best. Hardened alloy construction: extraordinarily tough and durable alloy means these tools can stand up to the toughest jobs. This front end service tool kit can remove the most stubborn ball joints, tie rod ends, and pitman arms.

All in one front end service kit: containing 5 adjustable tools for a wide range of domestic and import vehicles. Conveniently keeps all your tools in one organized and secure place. Universally compatible with a wide range of vehicles: The versatile design allows this tool to be used as a pitman arm remover, ball joint separator, import vehicles, or tie rod end puller for many small, domestic rear-wheel-drive vehicles, and light trucks.
BrandOrion Motor Tech #ad
ManufacturerOrion Motor Tech #ad
Height11.02 Inches
Length12.99 Inches
Width3.35 Inches
Part NumberPAP0006RD GWCA
Model13

5. Astro Pneumatic Tool

 #ad

Astro Pneumatic Tool 78620 Subaru Ball Joint Puller

#ad
Astro Pneumatic Tool #ad - For subaru baja 2003+, legacy 1990+, impreza 1993+, Forester 1998+, Outback 2000+ and more. For difficult to remove, seized, rusted and/or corroded bolt-in Subaru ball joints. Designed for easy use with vehicle on jack stands using a deep 24mm socket and impact or hand wrench. Or use included 5/8-18 thread adapter with any common slide hammer. Unique sliding pin non-rotating design removes ball joints in a single pulling motion without spinning the ball joint stud, reducing the chance of ball joint breakage.
BrandAstro Pneumatic Tool #ad
ManufacturerAstro Pneumatic Tool Company #ad
Height2.21 Inches
Length6.65 Inches
Weight1.8 Pounds
Width2.36 Inches
Part Number78620
Model78620

6. Orion Motor Tech

 #ad

Heavy Duty Ball Joint Press & U Joint Removal Tool Kit with 4x4 Adapters, for Most 2WD and 4WD Cars and Light Trucks BL

#ad
Orion Motor Tech #ad - Universal compatibility: fits most american domestic and imported cars and light pickup trucks with press-fit type ball joints. Includes a 4wd adapter for service on 1967 - current 1/2 and 3/4 ton 4WD vehicles with the Dana 30 or 44 front axle found on Ford, Dodge, GM, IHC, and Jeep vehicles.

Protective carrying case: each component is contained in a heavy-duty plastic carrying case with a handle for safe storage and quick organization. Professional-grade durability: constructed from heavy-duty forged steel with black-oxide finished adapters for maximum strength and longevity that resists rust and corrosion to endure years of heavy use. All-in-one tool kit: 3x receiving tubes, 1x receiving cup, 1x forcing-screw press, 1x Installation Adapter, 1x Screw, 1x Install Cup Adapter, 1x Removal Adapter, 1x Installing Cup.

If you are not satisfied with this product or if you have any questions, please feel free to let us know. Easy operation: use the orion motor tech ball joint press tool set with 4wd adapter to effortlessly remove press-fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive 2WD and 4-wheel drive 4WD vehicles without removing the control arm.
BrandOrion Motor Tech #ad
ManufacturerOrion Motor Tech #ad
Height3.15 Inches
Length14.57 Inches
Width11.02 Inches
Part NumberBJS0401BL
Model8542035342

7. Orion Motor Tech

 #ad

Heavy Duty Ball Joint Press & U Joint Removal Tool Kit with 4wd Adapters, for Most 2WD and 4WD Cars and Light Trucks BK

#ad
Orion Motor Tech #ad - Protective carrying case: each component is contained in a heavy-duty plastic carrying case with a handle for safe storage and quick organization. Easy operation: the orion motor tech ball joint press set with 4x4 adapters effortlessly removes press-fit parts including ball joints, brake anchor pins, U-joints, and more on most 2-wheel drive 2WD and 4-wheel drive 4WD vehicles without removing the control arm.

If you are not satisfied with this product or if you have any questions, please feel free to let us know. Professional-grade durability: constructed from heavy-duty forged steel with black-oxide finished adapters for maximum strength and longevity that resists rust and corrosion to endure years of heavy use.

All-in-one tool set: 3x receiving tubes, 1x install cup adapter, 1x Receiving Cup, 1x Removal Adapter, 1x Installation Adapter, 1x Screw, 1x forcing-screw press, 1x Installing Cup. Includes a 4wd adapter for service on 1967 - current 1/2 and 3/4 ton 4WD vehicles with the Dana 30 or 44 front axle found on Ford, GM, Dodge, IHC, and Jeep vehicles. Universal compatibility: fits most american domestic and imported cars and light pickup trucks with press-fit type ball joints.
BrandOrion Motor Tech #ad
ManufacturerOrion Motor Tech #ad
Height11.61 Inches
Length14.96 Inches
Width3.54 Inches
Part NumberBJS0401BK
Model8542035341

8. AURELIO TECH

 #ad

AURELIO TECH 10PCs Ball Joint Press Kit & U Joint Removal Tool with 4x4 Adapters, for Most 2WD and 4WD Cars and Light Trucks

#ad
AURELIO TECH #ad - Package include: 3x receiving tube, 1x installation adapter, 1x Removal Adapter, 1x Screw, 1x Forcing-screw Press, 1x Receiving Cup, 1x Install Cup Adapter, 1x Installing Cup.

Fit most american domestic and imported 2-wheel drive 2WD and 4-wheel drive 4WD cars and light pickup trucks that have press-fit type ball joints. Allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 44 front axle. Excellent for removal and installation of press-fit parts such as ball joints, brake anchor pins, U-joints, and more on most 2-wheel drive 2WD and 4-wheel drive 4WD vehicles without removing the control arm from the vehicle.
BrandAURELIO TECH #ad
ManufacturerAURELIO TECH #ad
Part NumberBJP-0001-10

9. OTC

 #ad

OTC 6297 Ball Joint Separator

#ad
OTC #ad - It works on many domestic and import front wheel drive vehicles. Lifetime limited warranty. This tool is used to separate the ball joint from the spindle support arm. Is adjustable up to 2" for different size ball joints.
BrandOTC #ad
ManufacturerOTC #ad
Height2.25 Inches
Length11 Inches
Weight2.85 Pounds
Width5.75 Inches
Part Number6297
Model6297
WarrantyLimited lifetime warranty

10. Powerbuilt

 #ad

Powerbuilt 648626 6 Pc Front End Service Set Kit 3

#ad
Powerbuilt #ad - For automotive front end work including changing tie rod ends, ball joints, steering linkages and steering boxes. Built to exceed tool standards. Made to be the most reliable tools in the market today. Manufacturer's lifetime warranty. Storage case complete with laminated instruction sheets with photos. Kit contains tie rod end pullers, ball joint remover, pitman arm puller, and tie rod end lifter. Pullers will not damage parts. Tool solutions for most all situations.
BrandPowerbuilt #ad
ManufacturerAlltrade Tools #ad
Height10.25 Inches
Length3.13 Inches
Weight10.3 Pounds
Width13.13 Inches
Part Number648626
Model648626