Top 10 20FT 10AN Braided Fuel Line – Automotive Replacement Fuel Hoses

As an Amazon Associate I earn from qualifying purchases.

1. theBlueStone

#ad

TheBlueStone -4AN -6AN -8AN -10AN Braided Fuel Line Hose 20FT -6AN Nylon Braided for 3/8" Tube Size

#ad
theBlueStone #ad - Working temperature: -40°F to +300°F. The fitting adapter for PTFE hose is NOT FIT. Burst pressure: 2000 PSI. Application for: racing fuel, alcohol based fuels, pump gas, fuels with ethanol, diesel, motor oil & coolant etc. Our rubber hose should compatible with rubber fitting adapter. Working pressure: 500 psi. Note: double check the hose size before bidding. Inner diameter: 8. 73 mm 034 inch, outer Diameter: 14. 22 mm 056 inch.
BrandtheBlueStone #ad
ManufacturertheBlueStone #ad
Part NumberGCR433

2. EVIL ENERGY

#ad

EVIL ENERGY 10AN 5/8" PTFE Fuel Line E85 Tube Nylon Stainless Steel Braided Universal 20FT Black 12.95mm 1/2"ID

#ad
EVIL ENERGY #ad - Bursting pressure PSI: 6000PSI. Reference the installation instruction included. Maximum working pressure PSI: 2000PSI. It is compatible with nearly every substance or agent used. Professional installation is highly recommended. But if you like diy, evil eNERGY prepared the installation instructions for you.

Please measure it before purchase! fit for 10an ptfe hose and fit ONLY. Working temperature range: -76℉ to 446℉ -60℃ to 230℃. Length: 20ft6m. An10 5/8" nylon and stainless steel braided PTFE fuel line holds up a lot stronger to heat and extreme circumstances than the nylon braided CPE fuel line. Application:the 10an ptfe fuel line is mostly used in fuel system, alcohol, transmission system, ethanol, petrol, cooler system and pump.

Can be worked with e85, oil, hydraulic fluid, pump gas, diesel, coolant, fuel etc. Ptfe: polytetrafluoroethylene ptfe fuel injection line is relatively hard, that's ok, it can't bend and fold in half. Inner diameter: 051in 12. 95mm. We also offer a 24-hour non-stop mail service, so if the product on this page is not what you need or have any questions, please feel free to contact us, and you will get a responsible and professional response.
BrandEVIL ENERGY #ad
ManufacturerSpeedwow Tuning #ad
Part NumberEV-00423BK-6

3. SUNROAD

#ad

20 Feet 10AN AN10 5/8" Fuel Line Hose Braided Stainless Steel Oil Gas Fuel Hose CPE Synthetic Rubber Line Silver

#ad
SUNROAD #ad - Working temperature: -40 ℉ to +248 ℉; working pressure: 1000PSI; Burst Pressure: 5000 PSI. Material: innter hose: cpe synthetic rubber;The middle layer: 304 stainless steel wire mesh sleeve;The outer layer: High quality braided nylon & stainless steel. Sizeid: an 10, length: 6. 09m/20ft, color: Silver. Application for: racing fuel, diesel, alcohol based fuels, pump gas, fuels with ethanol, motor oil & coolant etc. Premium nylon and stainless steel wires material, sturdy durable, abrasion and high temperature resistant, Perfect racing fittings for fuel injection use.
BrandSUNROAD #ad
ManufacturerSUNROAD #ad
Height13.78 Inches
Length17.72 Inches
Width15.16 Inches
Part NumberFuelHose-039

4. EVIL ENERGY

#ad

EVIL ENERGY 10AN 5/8" Fuel Line Fitting Kit Nylon Braided CPE Oil Hose Universal 20Ft Black

#ad
EVIL ENERGY #ad - Working temperature range: -40℉ to 257℉-40℃ to 125℃. Hose outside Diameter: 082inch 2083mm. Black braided nylon fuel hose features an all-black nylon fiber braided outer cover and a chlorinated Polyethylene CPE synthetic rubber inner line.

Outer nylon braided has excellent inflaming and safer to use. Not recommended installation in corrosive environment, 10an braided fuel line's service life will be influenced. Please notice that the service life might be shorter when it work with fuel. Reference installation instruction included. The 10an nylon braided fuel line kit includes: 10pcs 10an swivel hose ends 4pcs straight, 2pcs 90degree, 2pcs 180degree, 2pcs 45degree, 2pcs 10an hose separator clamp and 5/8 braided fuel line Length: 20 Ft.

Hose inner Diameter: 056inch 14. 29mm. Not fit e85. Maximum working Pressure psi: 500 psi. This braided 10an hose can be used in vehicle / motorcycle transmission cooler system, fuel tank, oil filter, oil sandwich adapter, diesel, oil, pump, such as fuel pump, fuel filter, pump gas, turbo system and fuel system, and etc. We offers 3-month after-sale service for the 10an 5/8 fuel line. Bursting Pressurepsi: 2000psi.
BrandEVIL ENERGY #ad
ManufacturerSpeedwow Tuning #ad
Height3.54 Inches
Length8.66 Inches
Width7.87 Inches
Part NumberKT01269AN10BK-HW

5. MOOSUN

#ad

MOOSUN 10AN 5/8" Nylon Braided CPE Fuel Line Hose Fitting Kit 20FT Red&Blue 14.27mm ID

#ad
MOOSUN #ad - Safety featuresnylon fiber and stainless steel braid 10an cover for excellent flexibility and resistance to abrasion 5/8 Braided nylon CPE fuel line can be used for a long time at -40℃ to 100℃ oil temperature. Outer nylon braided has excellent inflaming and safer to use.

Working temperature: -40℉ to 350℉. Compatible withmostly worked with coolant, fuel return system, pump, alcohol and air. You will getthe 10an nylon braided fuel line kit includes: 5/8 braided fuel line length:20ft/6m and 10pcs 10an swivel hose ends 4pcs straight, 2pcs 90degree, 2pcs 45degree, 2pcs 180degree Inner Diameter: 14.227mm056inch - outer Diameter: 2024mm079inch. Not fit e85. Fuel hose featuressilver braided nylon fuel hose features an all-silver nylon fiber braided outer cover and a Chlorinated Polyethylene CPE synthetic rubber inner line.

10an nylon braided hose can be used in brake system, oil return, pump gas, hydraulic fluid, oil, fuel, diesel, turbo cooler system and transmission system. Bursting pressure psi: 5000psi. Not recommended installation in corrosive environment, 10an braided fuel line's service life will be influenced. Hose end fittings featuresdesigned for smooth Flow, the hose end fittings are made of high-quality aluminum alloy material for strong strength.
BrandMOOSUN #ad
ManufacturerMOOSUN #ad
Height3.94 Inches
Length9.84 Inches
Weight5.5 Pounds
Width8.35 Inches
Part NumberMS-10AN20-10SRB
Model20FT(6m) Fuel Line Hose

6. BOWERKAR

#ad

Fuel Line Hose End Fittings Kit 10AN Nylon Stainless Steel Braid Black 5/8" x 20Ft, 14.27mm ID AN10

#ad
BOWERKAR #ad - Cpe hosethe 10an cpe hose fitting is reused, just replaced a new olive/ferrule when reusing fittings with CPE hose. Materialsthe 10an cpe fuel line hose mostly used in cooler system and pump, transmission system, pump gas, and etc, coolant, oil, alcohol, hydraulic fluid, diesel, fuel system, fuel, Can be worked with petrol, but not applicable to E85.

It is compatible with nearly every substance or agent used. Bursting pressure psi: 2000psi. Cpe tube is constructed with a seamless extruded CPE resin inner tube. Includesthe 10an nylon and stainless steel braided cpe fuel line kit includes: 10pcs 10an cpe hose ends 4 x straight Swivel Hose Ends, 2 x 90 Degree Swivel Hose Ends, 2 x 45 Degree Swivel Hose Ends, 2 x 180 Degree Swivel Hose Ends and 5/8 CPE braided fuel line Length:20ft/6M.

Warrantythree months limited warranty & Free lifetime technical support. Lifetimethe 10an cpe hose working temperature range: -40℉ to 257℉ -40℃ to 125℃. Maximum working Pressure psi: 500 psi.
BrandBOWERKAR #ad
ManufacturerBowerkar #ad
Part NumberFL001

7. Kraken Automotive

#ad

Kraken Automotive, 10AN Stainless Braided Hose for Fuel, Coolant and Air 20 Feet, Oil

#ad
Kraken Automotive #ad - Burst pressure: 5000psi. Id: 14. 27mm /. 562" od: 2024mm /. 797". Operating temp: -40°F to 350°F. Working pressure: 1000psi. Cut in 20 foot spools.
BrandKraken Automotive #ad
ManufacturerKraken Automotive #ad
Part NumberK00077

8. SUNROAD

#ad

20 Feet 10AN AN10 5/8" Fuel Line Hose Braided Stainless Steel Oil Gas Fuel Hose CPE Synthetic Rubber Line Black

#ad
SUNROAD #ad - Material: innter hose: cpe synthetic rubber;The middle layer: 304 stainless steel wire mesh sleeve;The outer layer: High quality braided nylon. Application for: racing fuel, pump gas, alcohol based fuels, diesel, fuels with ethanol, motor oil & coolant etc. Premium nylon and stainless steel wires material, abrasion and high temperature resistant, sturdy durable, Perfect racing fittings for fuel injection use. Sizeid: an 10, length: 6. 09m/20ft, Color: black. Working temperature: -40 ℉ to +248 ℉; working pressure: 500PSI; Burst Pressure: 2000 PSI.
BrandSUNROAD #ad
ManufacturerSUNROAD #ad
Height13.78 Inches
Length17.72 Inches
Width15.16 Inches
Part NumberFuelHose-040

9. labwork

#ad

Blue & Red Swivel Fittings, labwork 10AN 20 Ft Braided Stainless Steel Fuel Line Filler Feed Hose With 10pcs Rotary Swivel Hose Ends Kit Silver hose

#ad
labwork #ad - 20ft braided fuel hose line & 10AN Swivel Hose End Fitting Kit. Polished and anodized for bright appearance and corrosion protection. Removable head for both push-on or twist-lock applications, Swivel design for easy assembly. Made of premium quality Alloy Aluminum, high strength and good durability. Note: not replacement for E85.
Brandlabwork #ad
Manufacturerlabwork #ad
Height4.33 Inches
Length12.8 Inches
Weight6.72 Pounds
Width9.84 Inches
Part Number6156406-502012
ModelDoes not Apply

10. YaeMarine

#ad

YaeMarine 5/8" 20FT 10AN Stainless Braided Nylon Oil Fuel Hose Line + 10 Pcs AN10 Swivel Hose Fittings + 2 Pcs AN10 Hose Separator Clamps

#ad
YaeMarine #ad - Excellently sealed, 100% no leaking under high pressure and temperature;. Note : professional installation is highly recommended. The inner tube is oil resistant, high temperature resistant, gasoline resistant and corrosion resistant.

The outer nylon braided has excellent inflaming. You can get the most friendly customer service, please feel free to contact us if you encounter any problems during use, 90 days free return or refund. Features excellent flexibility and resistance to abrasion. Applicable modified car oil cooler accessories;. Fittings - high quality lightweight Aluminum Material, Center stainless steel, Anodized Finish for strength and durability;.

Materials : hose - outer nylon braided, inner synthetic rubber. Together with 10 pcs an10 swivel hose fittings4pcs straight, an10, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree + 2 Pcs AN10 Hose Separator Clamps;. Safer to use. Working temperature Range: -40℉ to 350℉. Bursting pressurepsi 2000psi/138bar. Stainless braided nylon oil fuel hose : 20ft, maximum working pressure psi 500 psi/34. 5bar.
BrandYaeMarine #ad
ManufacturerYAEMART CORPORATION #ad
Part NumberMI-0235